Introducing the Ultimate Lid Extension for Your Creality K1 & K1C 3D Printer in VERSION 2! Welcome to Sektor 7 Studios, where innovation meets performance. We’ve meticulously crafted a high-quality lid extension (Raiser) for your Creality K1 & K1C 3D printer, designed to elevate your printing projects to the next level.

Prepare to be amazed by our latest breakthrough: an exceptional lid extension (Raiser) for your Creality K1 & K1C 3D printer, now boasting an innovative SWING-ARM-DESIGN. Experience unparalleled convenience with enhanced mobility for the filament tube and power cable, eliminating the annoyance of chain slapping against the printer. Elevate your printing experience to new heights of precision and ease.

THIS IS VERSION 2 --> WITH SWING-ARM

We have designed two different versions:

• Version 1 (without SWING-ARM) --> https://than.gs/m/1087034
• Version 2 (this one, Upgraded version with SWING-ARM, for advanced users)

We have also created a version that works without bearings in the SWING-ARM. However, we recommend installation with bearings. If you decide to install without bearings, please select the correct mounting instructions. Both versions have their advantages, choose the one you like the most! In the "Makes" we briefly introduce you to the raiser in a video.

OUR STL FILES OFFERS YOU:

• Perfect Fit on Creality K1 & K1C
• Enhanced Functionality
• Improved Print Quality
• Easy Installation
• Noise reduction
• More moving space for the Bowden tube
• Air supply regulation & indirect control of the temperature
• Bowden tube passage to the back and side (you can choose)
• Detailed assembly instructions are supplied as a download
• Detailed print settings are supplied as a download
• More mobility of the filament tube and the power cable (no annoying slapping of the chain against the printer)
• Side filament outlet
• Filament sensor is located inside the raiser

THE FOLLOWING PARTS MUST BE PRINTED:

• PART_RAISER_K1 (3 TIMES)
• PART_BACK-RIGHT_RAISER_SWING-ARM_K1 (1 TIME)
• SLIDER (8 TIMES)
• CONTROLLER_WITH_LOGO (8 TIMES) or CONTROLLER_WITHOUT_LOGO (8 TIMES)
• DRIVE-SHAFT (1 TIMES)
• HOLDER_SWING-ARM (1 TIMES)
• SWING-ARM (1 TIMES)
• WASHER_FILAMENT-SENSOR (1 TIMES)
• CABLE_CLIP (3-5 TIMES)
• BEARING-COVER_TOP (3-5 TIMES)
• BEARING-COVER_BOTTOM (3-5 TIMES)
• SWING-ARM_CLIP (2 TIMES)

PRINT SETTINGS (Please read the INSTRUCTIONS and the PRINT SETTINGS)

• Printing Material: PLA/PETG/ABS/ASA (heat-resistant filaments are recommended, but not absolutely necessary)
• Infill: 15%
• Layer Height: 0.2mm (Attention! CONTROLLER + SLIDER with 0,1 mm or 0,16 mm layer
• Walls: 2
• Support Structure: none support needed (we have modeled the supports for you in the model, these must be removed with a click after printing)
• Recommendation: BRIM with 5 lines, 100mm/s print speed (Attention! CONTROLLER with minimum 8 lines)

NOT QUITE SURE IF YOU WANT THE RAISER YET? GET AN OVERVIEW WITH OUR DETAILED MOUNTING & PRINTING INSTRUCTIONS:

• https://sektor7.studio/creality-k1-k1c-raiser-top-cover-upgrade-version-2/#lepopup-k1-k1c-v2-instructions

More Upgrades for the Creality K1 Series you will find here in the collection:

• https://than.gs/c/28168

Do you want to download all our Raiser versions? Or sell the printed physical products? Then use our subscription on Thangs :)

** If you have any questions feel free to contact us. You can contact us under the following email:**

• support@sektor7.studio

We are happy about every new follower.