We're going into the realm of pretend play with a dream wand and tiara. This was made for my little princess and now you can print one and have a little fun too.

The tiara fits my one-year-old, it should fit most small children's heads.

The wand is in three pieces, and you must use glue to put it together.

Everything is printed in place and requires no support.

Painted 3mf included. Verify settings; what works for me may not necessarily be the correct setting for your printer.

Printing recommendations:    .20 layer height Print in place, no support required Brim the crown and you may want to brim the handle of the wand. 3 walls - 15% infill Allow the plate to cool before removing the prints

Filaments:      Protopasta -Unicorn Tears Cookiecad - Sunset Elixer Protopasta - Nebula Stardust

Important Please Read:   All Rebel Alicorn Designs are protected under Copyright Law. With your purchase, you are given the right to download and print the design for your personal use only. You do NOT have permission to resell, remix, or redistribute the digital files in any way. No alterations to the designs are permitted. Prints of the designs cannot be sold without permission. To sell the PRINTS of Rebel Alicorn Designs, you must obtain authorization by joining the “Legacy Merchant Tier or Merchant Tier” on either Patreon, Thangs, or MMF.

More designs are coming soon! Check out my socials and give a follow to keep up to date.

Warning:  NOT suitable for unsupervised play by children or pets. Small parts can become a choking hazard if broken off due to rough play and broken 3D printed parts can create sharp edges. NOT recommended for children under 3.