"**_Pika Pika, Pikachu ~_**" 💛 Christmas is almost here ~ ! Have you already started decorating your home for this holiday or you're still not ready for it? 🎄 Well, in both cases, what about printing this cute little Pikachu in a Christmas sock to bring some happiness into your house? 🎄 (_3 STLs included: Head, Sock and Full_) ⸻⸻⸻⸻⸻⸻⸻⸻ **_Please don't forget to leave a like if you enjoy my work!_** ⸻⸻⸻⸻⸻⸻⸻⸻ **MY 3D PRINTING SETTINGS** - 3D Printer: Geeetech A10 - Nozzle: 0.4 mm - Slicer: Ultimaker Cura 4.12.0 - Layer height: 0.12 mm (2/3 wall thickness; 4 top/3bottom layers) - Infill : 15% - Support needed - Printing Temperature: 216°C / Build Plate Temperature: 64°C - Print speed: 35 mm/sec / Outer Wall Speed: 16 mm/s - Filament: Red Glitter PLA by Eryone - Size: Full : 5,6 x 4,3 x 10,53 cm (X , Y , Z) ⸻⸻⸻⸻⸻⸻⸻⸻ Don't be shy and upload your make! (If you share it on your socials, please be sure to tag @𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮.3𝙙, so that I can see and re-share it / if you have TikTok, you can also use the hashtag #𝙧𝙖𝙣𝙙𝙤𝙢𝙞𝙯𝙮 when sharing your video) ⸻⸻⸻⸻⸻⸻⸻⸻ 𝙏𝙝𝙞𝙨 𝙬𝙤𝙧𝙠 𝙞𝙨 𝙡𝙞𝙘𝙚𝙣𝙨𝙚𝙙 𝙪𝙣𝙙𝙚𝙧 𝙩𝙝𝙚 𝘾𝙧𝙚𝙖𝙩𝙞𝙫𝙚 𝘾𝙤𝙢𝙢𝙤𝙣𝙨 𝘼𝙩𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣-𝙉𝙤𝙣𝘾𝙤𝙢𝙢𝙚𝙧𝙘𝙞𝙖𝙡-𝙉𝙤𝘿𝙚𝙧𝙞𝙫𝙖𝙩𝙞𝙫𝙚𝙨 4.0 𝙄𝙣𝙩𝙚𝙧𝙣𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝙇𝙞𝙘𝙚𝙣𝙨𝙚. ⸻⸻⸻⸻⸻⸻⸻⸻ **_If you would like to support me, receive exclusive benefits and you're interested in having a commercial license for selling 3D Printed items (not files) of my works, please visit my Patreon here benefits :_** https://www.patreon.com/RandomizY ⸻⸻⸻⸻⸻⸻⸻⸻ **INSTAGRAM** : https://www.instagram.com/randomizy.3d/ **TWITTER** : https://twitter.com/Randomizy3D **FACEBOOK** : https://www.facebook.com/randomizy.3D **Check More Here** : https://linktr.ee/RandomizY