Multipoint Rings are placed at the back of "Screw-On Mount Multipoints" to stop the print from splitting when being screwed into, and cretes a flat surface to keep it stable. It comes with four sizes:

S = Use this if you don't want to see anything behind your Multipoint, it will wiggle. M = Smaller than a Snap L = Placing two of these next to each other will space them out by 25 mm. XL = Placing two of these next to each other will space them out by 50 mm.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, click here.

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io