When connecting a Panel to a Base Plate, the Panel will not be resting on the surface, so you use “Panel Feet” to support the Panel.

This is a “Panel Connector Foot”, it supports the Panel and can also connect two Panels together.

There is also a “Panel Edge Foot” that goes on the edges of the Panel and doesn’t connect with other Panels.

This part comes with two tolerances: standard and tight.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

—

This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at https://multiboard.io