These brackets connect to Multiboard Snaps (use a Weight Bearing Snaps at the top) and are bolt-locked using a Multipoint.
They can hold another Tile, a Multibin Base Plate, or a Tray:
-
Holding a Tile: Add DS Snaps to your Tile Shelf and bolt-lock the bracket to the Tile using Mid Hole Bolt Lockers.
-
Holding a Base Plate: Add a Spacer to the inserts of the bracket, then bolt lock your Base Plate using Mid Hole Bolt Lockers.
-
Holding a Tray: Attach the Tray to the Bracket using a Bracket-Multipoint Joint.
Printing Guidelines:
Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.
The printing orientation is as provided in the file. Make sure the downloaded files are .STL.
For more information about printer settings, click here.