Multipoint Plates are an alternative connection board, allowing for the attachment of fixed Pop-Ins or sliding Multipoints and Rails.

Single-Sided Plates only have connection points on one side and are recommended for most use cases.

These Plates are 150x100 mm.

Attach the Plate to a surface using Screw-On Mounts. Connect Plates together using Dual Clips.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, click here.

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io