Use “Bolt-Lock Mounts” if you want your entire Multiboard or segments of your Multiboard to be easily removable. This version creates a 15 mm offset from the surface.

To set it up…

1. Connect your Tiles together using:

• DS Snap Connectors (Part A & Part B) - this will create a 15 mm offset from the wall (look at image 5).
• Or use Regular Snap Connectors - the offset will be less than 15 mm, so to get the 15 mm offset, use Bolt-Lock Mount Washers (look at image 6).

2. Attach the Bolt-Lock Mounts to a surface using screws (with the help of the Installation Tool).

3. Then secure your tiles to the mounts using 13 mm Small Thread Bolts.

Learn more about this part at https://multiboard.io/knowledge-hub

Printing Guidelines:

Video tutorial on how to print stacks: https://www.youtube.com/watch?v=xs2urfM0MRM

This stack print has been designed specifically for 0.2 mm layer heights. They have a 0.2 mm gap between each print. Make sure that all top surfaces get ironed. As a bonus, set the seam alignment to random for maximum strength.

Apart form that, use the default recommended settings: 3 wall perimeters in wall thickness. 15% infill. No supports are needed. The printing orientation is as provided in the file.

—

This object is part of Multiboard, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at https://multiboard.io