This is the letter insert I designed for WALL-T, which is a TRON variant of [The Kit Kiln's amazing WALL-E model](https://thangs.com/designer/The%20Kit%20Kiln/3d-model/WALL-E%20Kit%20%28No%20Support%2C%20No%20AMS%2C%20No%20Glue%29-1129563).
 
It just replaces the "E" from that model, it is sized for the hole with a registration notch on the back, depending on printer tolerances it may need a little bit of pressure to go in.
 
The profile is set up on 2 plates with 3 objects per plate just so in case one gets messed up you have some spares.
 
STLs are already oriented for printing, also including a 3MF file for Bambu Studio.

Have fun on the grid!

Filament used:
Polymaker Polyterra Charcoal Black PLA
SUNLU Glow Blue PLA

WALL-T Tron Font Letter for WALL-E by The Kit Kiln

WALL-T-Letter.3mf

I created this Identity Disc as an accessory for my WALL-T, which is a TRON variant of [The Kit Kiln's amazing WALL-E model](https://thangs.com/designer/The%20Kit%20Kiln/3d-model/WALL-E%20Kit%20%28No%20Support%2C%20No%20AMS%2C%20No%20Glue%29-1129563), available on Thangs. 

I custom designed this for WALL-T along with custom T in the Tron font, which is also available on Thangs. It's small enough to print on small printers such as the A1 Mini, all STLs are oriented for printing, as well as the included 3MF file for Bambu Studio. 

Make sure the pins are in the correct orientation with the tops flush with the top of the discs. Looking forward to seeing your makes!

If you want the larger version of this disc that works for human programs, [check that out here!](https://thangs.com/designer/Logal727/3d-model/Glowing%20TRON%20Identity%20Disc%20%28NO%20AMS%2C%20NO%20SUPPORTS%29-1138053)

I used:
Polymaker Polyterra Charcoal Black PLA
SUNLU Glow Blue PLA

**This is for personal use only, no commercial use for the prints or the files. **

See more of my models on Makerworld! 

Identity Disc for WALL-T 

WALL-T-Sized.3mf

**ENTER THE GRID**

Made to be easy and quick to print, this TRON Identity Disc requires no AMS or supports. Aligned with its true-to-story characteristics, the disc has a distinct glow-in-the-dark feature, for which Glow in the Dark filament is needed. The best part? No LEDs required!

Designed with sufficient dimensions to feel comfortable in hand while being printable on an A1 Mini-sized printer, this identity disc poses no impediments to scaling up, should the need arise. Comprising 5 plates or files to print and assemble, this model ensures a smooth printing and assembling process to recreate the essence of the TRON realm.

Just print out the 5 plates/files and put it together. I've checked the tolerances on my printer and it fits nicely, but you may need to adjust scaling for the pins depending on your printer settings if they are too loose or tight. 

Make sure the pins are in the correct orientation with the tops flush with the top of the discs. Looking forward to seeing your makes!

The designer used Polymaker Polyterra Charcoal Black PLA and SUNLU Blue Glow PLA to create this model. 

**Take note that this model is purely for personal use, strictly prohibiting commercial sales. 
**
Check out more of my models on [Makerworld! ](https://makerworld.com/en/@McG3D)


McG3D

Achievements

Voyager

Novice Maker

Seedling

Rising Star

Pinned models

Glowing TRON Identity Disc (NO AMS, NO SUPPORTS)

Identity Disc for WALL-T

WALL-T Tron Font Letter for WALL-E by The Kit Kiln

Identity Disc for WALL-T

Glowing TRON Identity Disc (NO AMS, NO SUPPORTS)