Double Brake Tubing Clamp - .1875" Dual Brake Line Clamps
byMandicReally
Building a Custom Car or Race Car? Restoring a Classic Car? These clamps are to attach and organize your 3/16" Brake Line Tubing (.1875" / 4.7mm). This design can clamp Two 3/16" Brake Lines together, or attach them to a Frame Rail / Body Panels.
Check out this video to see them in action: https://youtu.be/TBEDVi_e3qg
Uses #10-32 screws to clamp the two halves together while attaching to a Frame Rail or Body Panel. Use with a #10-32 Nut to clamp in thin air (such as coming off a master cylinder).
Recommend PETG, ABS, or ASA filament (or other suitable strength / temperature handling materials.) PLA is NOT Suitable for use in Automotive Applications.
**WARNING: Due to variation in the printing process we are Not Resposible for improper use. FOR OFF ROAD USE ONLY. Use at your own risk. **
- Necessary Parts (Affiliate Links):
- #10-32 Counter Sunk Screws: https://amzn.to/37Sw3eI
- #10-32 Nuts: https://amzn.to/3ANJ3Pa
- INCLUDED FILES:
- CAD STEP File to learn how I designed these.
- Double Tube 3/16" Clamp Top
- Double Tube 3/16" Clamp Bottom
- PRINT PARAMETERS:
- PETG Minimum (ABS/ASA or other Higher Temp Material Recommended)
- Supports required in the Nut Pocket on "Bottom" half.
- 4 Perimeters MINIMUM
- 40%+ Infill (I used Rectilinear)
Mine were printed in California Filament "Black" PETG.
Want to Support what I do? Check out my social medias please!
Link Tree: http://www.HotRodHippie.com/links
All of my Designs are covered by a Creative Commons Non-Commercial License. Sale of prints using my designs are the sole right of myself, the designer, and those I license to do so. Please understand every design is hours of work and multiple prototype prints to ensure quality. Unauthorized sales will result in new designs not being made public.
**WARNING: Due to variation in the printing process we are Not Resposible for improper use. FOR OFF ROAD USE ONLY. Use at your own risk. **
PLEASE Credit any and all Remixes of my designs: MandicReally