tracking pixel
Devin M

Wavy Springo

by
Make Anything
Follow
Follow
Remix Model
Make Anything
Make Anything
Image 1 of 4
Wavy Springo 3d model
2D
3D
Makes
Wavy Springo 3d model
Wavy Springo 3d model
Wavy Springo 3d model
Wavy Springo 3d model
This model is restricted by licensing terms. 
91 Likes240 DownloadsAugust 4, 2023
This model is restricted by licensing terms. 


Another amazing Springo printed without supports using regular old PLA! This Springo has a smooth wavy surface that can come off as fun or classy, depending on your color choice.

Print at .15mm layer height for this to work correctly. Check the layers in your slicer, there should be a 1-2 layer gap between each layer of the spring. I print with 3 shells/outlines and 7 top, 6 bottom layers so the spring itself is solid. After printing, separate carefully with a palette knife, butter knife, etc. How easily the springo separates will vary based on your printer, filament, slicer settings, etc.. So good luck and please share your results!

You should be very cautious separating the layers of the Springo, but once it's correctly popped apart these things are surprisingly resilient for PLA prints.

Model photographed was printed with MatterHackers PRO PLA Neon Green. It looks wicked, and glows under a black light!


91 Likes240 DownloadsAugust 4, 2023
1




This model is restricted by licensing terms. 
91 Likes240 DownloadsAugust 4, 2023
This model is restricted by licensing terms.