Use this textured Moss Frame to add a touch of earthly charm to the Chunky Puck Drip Tray (100mm), or use it on its own as a catchall, etc. It's a simple and versatile print to liven up your home!

Pictured with the Fuzzy Stripes Planter, available separately here.

Download includes raw STL files, plus pre-sliced 3MF files for Orca/Bambu Studio and Prusa/Qidi Studio.

Printing Guidelines

• This model is designed to be printed with Fuzzy Skin set to 'Contour and Hole', with Fuzzy skin point distance '0.15mm' and Fuzzy skin thickness '0.3mm'. This should result in a clean fit with the 100mm Chunky Puck Drip Tray. For other purposes you are free to experiment more! Save material by printing the 'Open' version for your drip tray, or print the 'Dish' version for more versatility.

• I used a 0.2mm default layer height, but with Adaptive layer height between 0.28mm and 0.08mm, to smooth over the top curves. Click the 'smooth' option 15 times or so to really smooth out the transition. The Fuzzy skin setting will also help obscure the layer lines.

• 1 wall loops and lightning infill will minimize print time and material usage. You can use more walls for additional strength, but the fuzzy skin already makes the part more sturdy. 3 solid bottom layers, 6 solid top layers.

• Save a tiny bit of print time by splitting the part at 10mm, and setting the fuzzy skin for the bottom half to only 'Contour'. You can also disable 'Ensure Vertical Wall Thickness'.