A pretty pot is pointless if your plants are unhappy! These EZPZ Pot Spacers lift your plant pots slightly above the drip tray or dish underneath, allowing the soil to drain properly and providing adequate airflow to the roots. The result is a healthier plant and the freedom to pair whichever planters and drip trays you desire.

This collection includes a wide range of sizes to match any pot. Choose a diameter equal to or slightly smaller than the base of your pot for a stable and effective spacer. If you want a more specific diameter, you can scale up the closest size in the X/Y directions, or scale the height as well if you want a taller stand. For a beefier spacer, you can scale up even smaller sizes. The simplicity of this design makes it extra versatile!

Printing Guidelines

• Print solid using standard settings. I just used 0.2mm Standard settings and set Wall Loops (perimeters) to 6+
• PLA works fine for most indoor plants, but PETG, ABS, or ASA will be more resistant to heat and warping over time.
• If you only want to change the diameter and not height, I recommend first doing a 'Uniform Scale' and setting the 'Y Size' to your desired diameter, then uncheck 'Uniform Scale' and change the 'Z Scale' back to 100%.