Devin B
Devin B

PLEIADES Soap Cover // 47x96x130

by
Make Anything
Make Anything
Make Anything
Make Anything
|
Image 1 of 8
PLEIADES Soap Cover // 47x96x130 3d model
Make Anything
Make Anything
|
Image 1 of 8
PLEIADES Soap Cover // 47x96x130 3d model
2D
3D
Makes
PLEIADES Soap Cover // 47x96x130 3d model
PLEIADES Soap Cover // 47x96x130 3d model
PLEIADES Soap Cover // 47x96x130 3d model
PLEIADES Soap Cover // 47x96x130 3d model
PLEIADES Soap Cover // 47x96x130 3d model
PLEIADES Soap Cover // 47x96x130 3d model
PLEIADES Soap Cover // 47x96x130 3d model
PLEIADES Soap Cover // 47x96x130 3d model

PLEIADES Soap Cover // 47x96x130

The PLEIADES Soap Cover is a quick and clever way to elevate your boring soap bottle. This fits bottles up to 47 mm x 96 mm x 130 mm tall with a 28mm opening.


My PLEIADES series of prints are designed to be printed in vase/spiral mode in your slicer. I suggest printing this model with a 0.4 mm nozzle width. Adjust bottom solid layers to be 1.6 mm thick (or the maximum number of layers before the hole is covered). No top layers. Make sure your slicer is not set to close small gaps. In BambuStudio I set the 'Slice gap closing radius' to 0 mm


Photographed models were printed on the Bambu Lab X1-Carbon 3D Printer using Bambu Lab PETG-CF and Bambu Green PLA filaments.* *These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!


11 Likes5 DownloadsApril 1, 2024
This model is restricted by licensing terms.