This model is restricted by licensing terms.
View license.
Love is in the air this Valentine's season! This cute heart bubble wand is a freebie from the full set for my Thangs members. Based on a competition winning design I came up with way back in 2014, and have now recreated and improved.
Included files:
- Bottle Plain - Simple bottle without graphics
- Bottle Vase Mode - Vase mode version of the plain bottle, which may provide a cleaner and quicker print on certain machines.
- Lid Heart No Seal - Bottle lid with a debossed heart graphic that can be printed with a single color printer. Optionally, do a color swap after the first 2 layers to achieve a two color graphic. The 'no seal' version of the lid is designed to work without the TPU seal. A clean print will still be watertight, but may require a bit more tightening.
- Lid Heart - Bottle lid with a debossed heart graphic that can be printed with a single color printer. Optionally, do a color swap after the first 2 layers to achieve a two color graphic. This version holds the TPU Seal insert for a more effective watertight seal.
- Lid Plain No Seal - A blank lid for simple printing. The 'no seal' version of the lid is designed to work without the TPU seal. A clean print will still be watertight, but may require a bit more tightening.
- Lid Plain - A blank lid for simple printing. This version holds the TPU Seal insert for a more effective watertight seal.
- TPU Seal - A round insert that fits into the inside bottom of the Lid for a more effective watertight seal.
- Wand Heart - A bubble wand with Cupid's arrow piercing a heart
**Bubble solution not included... I'm still figuring out how to print that!
Printing Guidelines
- Bottle - Print solid (except Vase Mode version). A well tuned printer will produce a watertight bottle using default settings. If your bottle is not watertight, you can increase the 'flow ratio' or 'extrusion multiplier' by 1-2%. If you're printing a version with the graphic, I suggest 0.12mm layer height to capture the tiny details. Otherwise any standard layer height should be fine.
- Lid - Default print settings. Print solid.
- TPU Seal - Default print settings for TPU. Print solid.
- Wand - Default print settings. Print solid.
Photographed models were printed on the Bambu Lab X1-Carbon 3D Printer using Bambu Lab PC and PETG filaments.* *These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!
Categories:
17 Likes35 DownloadsFebruary 2, 2024
17 Likes35 DownloadsFebruary 2, 2024
This model is restricted by licensing terms.
View license.