Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5174634.
This is a gift box designed for a lightsaber handle.
Not a complicated print/build, the fun was in painting and finishing it.
The saber support and internal lid corner pieces are separate so they can be scaled to your needs or left out entirely if you don't want to have them. The lid inner lip is 2mm, should be plenty to fit properly.
There is only one box shell piece; just print it twice or mirror it in one print job, your preference. I squared up the shorter dimensions because originally.
Overall dimensions ~305x55x55mm
A #4 1/2" wood screw does work, but feels a wee bit too big, if you can find smaller that works - use that instead.
The saber logo is probably going to be the most troublesome piece to print just because it's a fine detail very thin layered piece. I got lucky once without any sort of brim/raft and then the other (I was gifting two of these) I had to use a brim because it just wouldn't come out nice. The narrow tips are the fiddliest bit; do whatchya gotta do to make it work.
LATCH NOTE: I made no modifications to this tidbit, I am including the entire project in zip format so that my 'thing' entry is complete to the way I created it. Grab it from the files here or go to the source (referenced under 'remixed from') - whichever you prefer.