tracking pixel
Drew M

UPGRADE Raspberry Pi 7 Inch Touchscreen Case

by
ImmenseFIend
Follow
Follow
Remix Model
UPGRADE Raspberry Pi 7 Inch Touchscreen Case 3d model
2D
3D
Makes
Be the first to upload a make
This model is restricted by licensing terms. 
0 Likes1 DownloadsApril 19, 2022
This model is restricted by licensing terms. 


Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4852139.

This is my take on pimping out this raspberry pi case. It's got heat sinks, a 5v fan, and my fiber optic indicator light design.

If you are going to print this, you will still need the file called "Raspi7inch_Front.stl" from the original. If you don't plan on using the fiber optic indicator lights, you can use the "Raspi7inch_Case.stl" from the original as well. Basically, the only difference between my remix of the case and the original is that mine is slightly taller to accommodate the fiber optic indicator mounts and I made the side ports (USB-C, HDMI, etc) a bit easier to get into.

2020 mounts that I used: https://www.thingiverse.com/thing:4561701

Piber Optic indicator system: https://www.thingiverse.com/thing:4843174


0 Likes1 DownloadsApril 19, 2022




This model is restricted by licensing terms. 
0 Likes1 DownloadsApril 19, 2022
This model is restricted by licensing terms.