BORING Putty Knife & Glue Spreader - Set
Description
If you're renovating or do bigger glue-ups, this set will be perfect for you. We made them primarily because you never have one of these when you need it the most. But also because I aint gonna drive to the hardware store just for that! And it turns out, printing these is also actually cheaper.
Design
Cheap but competitive. Our design goal was to print these fast and at a minimum cost, without sacrificing its functionality.
Material
The stiffness is developed around PLA, but feel free to use any material you have flying around. If you want a more flexible feel, we suggest PETG.
Printing
Too easy! No Supports. No Brim. Just some Infill. Even if you print these solid, your print-times and material usage will only marginally increase.