This is a fun little UFO lamp. It can be lit up in multiple ways. There is a cavity in the top section that holds a tealight facing up or down. You can put a tealight underneath the beam as well. For a stronger illumination, you can use a corded LED light of your choosing. This can go in the top or the bottom or both. There is an optional alien that sits in the top. This little dude is hollow and will light up if you have a strong enough light. And of course there is the cow.
The alien and cow are colored for AMS multicolor printing. I didn't have time to print the multicolored cow, so I just printed mine in white and slapped some acrylic paint on it.
I recommend using white (or translucent) for the beam and a silk silver or gold for the UFO body. There are two versions of the beam. One is for AMS printing and the beam is attached to the bottom UFO section. The other is in two pieces for MonoColor and the two pieces can just be glued together easily with some super glue.
The UFO bottom Threads into the top. This piece should be printed upside down with some support at about 80degrees (10 degrees in BambuStudio) touching buildplate. Everything else can be printed support free.
Have fun printing and enjoy!