The 'Flavorful Coffee Shop' is a meticulously designed 3D printable model of a cozy coffee shop. The model features a detailed interior and exterior, capturing the essence of a quaint and inviting coffee shop. The exterior includes a small patio area with a table and chairs, perfect for outdoor seating. The interior showcases a well-organized counter with a display case filled with pastries, a coffee machine, a cash register and various other coffee-making equipment. There are also stools for customers to sit at the counter. The shop is adorned with a sign that reads 'COFFEE' with a coffee cup illustration, adding to the charm and appeal of the model. The intricate details and realistic elements make this model both interesting and relevant for enthusiasts of 3D printing and miniature models. 3D printing settings

Layer height: 0.15mm to 0.2mm Supports: Yes, use where appropriate. Brim: Yes, use where appropriate. Wall generator: Arachne Outer wall speed: 45mm/s Wall print order: Outer/Inner/Outer

The roof parts snap together and can also be glued. Some parts require gluing. Use the included photos to reference for assembly. The base, shop floor, foundation, and walls parts may require clamping while glue cures. Table, counter top, and other accessories with inlays must be printed facing down on the bed and painted in slicer. You can hand paint them as well. The coffee shop floor includes impressions for placing the black and white tiled floor, the counters, counter tops to the counters, walls, foundation, and base. Some accessories have multiple parts that area named as "pt1" or "pt2" or may be named with same name but an "A' or "B" at the end, these go together. The fence may be difficult to insert, if your printer makes the holes slightly too small then either carefully shave them bigger or you can drop some glue in the holes, bit of glue on the fence feet and hold the fence up in place until the glue sets. I recommend using "JB Weld: SuperWeld Extreme". It's not expensive, it is very strong, and sets quickly while fully curing in 24hours. You will need to 2D print a tiny newspaper to put in the newspaper holder at the end of the forward counter.