Tiny Reindeer! 🦌
Hi Cinders!
Sorry I'm a little late to the reindeer party! I AM SO HAPPY TO FINALLY RELEASE THIS DESIGN!!! - TINY REINDEER! It took some extra testing to be able to get you all the best version of this Reindeer that I could - and I'm so excited with how it turned out!
My kids played a huge part in this design, telling me the head HAD to move. With that challenge, plus not wanting any pop-in pieces, I re-designed the Tessie-Style neck for this print! This Reindeer features 4 articulating legs that it can stand on plus a fully articulating head which gives it such life!
PRINTING NOTES:
- This is an all-in-one design that prints with the neck and head print flat on the print bed. When done printing, click the neck in the upright position.
- Depending on filament and size you may have to push pretty hard to "click" the neck into place. Originally this was designed so that no matter what filament and how many time you/customers/kids move the neck down the back up, the neck will still hold in place. It has been thoroughly tested to work and hold without breakage.
- This print has been tested between sizes 100%-60%. We do not recommend printing above 100% as the neck gets harder to click it the bigger the size.
I hope you all enjoy this design! ONE more releasing TOMORROW before the Holidays!! Thank you all so much for you support!
- Tracy
FILAMENT:
https://www.amazon.com/shop/cinderwing3d
Deer body colors: Amolen Red Limestone, Sunlu wood color, Locyfens Metal Multicolor, Ziro Gradient Rainbow
Eyes: Sunlu White, Sunlu Black
Gold Bow: CC3D Silk Gold
Red: Sunlu Silk Red
Single color: Ziro Purple Sunset Matte
All my designs are print-in-place (unless otherwise specified) and require no supports. All you need is a clean bed and you're off!
Designs are tested between 60%-100% for strength and articulation! I will not release a design that is too fragile at these sizes. All designs go through our Cinder Test Team!
Print Settings: .2 Layer height, 15% infill, gyroid infill, no brim, and no supports. (If there are smaller parts of your print that have a hard time staying stuck to the plate, please try a brim around those parts) Any errors regarding floating regions can be safely ignored.
Please join our discord chat below for more help and discussions.
NOVEMBER 2024 Models:
- Tiny Turkey - RELEASED
- 3 Pack Tiny Spiders - EXCLUSIVE - RELEASED
- Bow Spider
- Santa Spider
- Snowflake Spider
- "Santaurtle" Santa Turtle - RELEASED
- Baby Storm Dragon - EXCLUSIVE - RELEASED
- Festive T-rex's - EXCLUSIVE - RELEASED
- Dinodeer
- Santasaurus
- Tiny Reindeer - RELEASED
- Secret Design
Please see WELCOME POST for questions, all exclusive releases, and links!
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!