Michael M
Michael M

worlds created within the pages - Art panel #2 of designs from the books

by
BooneCo3d
BooneCo3d
BooneCo3d
BooneCo3d
|
Image 1 of 3
worlds created within the pages - Art panel #2 of designs from the books 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 3
worlds created within the pages - Art panel #2 of designs from the books 3d model
2D
3D
Makes
worlds created within the pages - Art panel #2 of designs from the books 3d model
worlds created within the pages - Art panel #2 of designs from the books 3d model
worlds created within the pages - Art panel #2 of designs from the books 3d model

worlds created within the pages - Art panel #2 of designs from the books

New series I have been working on and collecting artwork for. The series is sharing what comes from the pages of books in an artistic way.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 167.78x209.73mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Green At layer #8 (0.72mm) swap to Beige At layer #19 (1.6mm) swap to Ivory White for the rest.