Michael M
Michael M

From nothing to art - creation of a wolf - Wall art

by
BooneCo3d
BooneCo3d
BooneCo3d
BooneCo3d
|
Image 1 of 3
From nothing to art - creation of a wolf - Wall art 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 3
From nothing to art - creation of a wolf - Wall art 3d model
2D
3D
Makes
From nothing to art - creation of a wolf - Wall art 3d model
From nothing to art - creation of a wolf - Wall art 3d model
From nothing to art - creation of a wolf - Wall art 3d model

From nothing to art - creation of a wolf - Wall art

Last piece for now. This is a design I found which shows a wolf head in a very thought out pattern development.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 143.68x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments

Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Dark Blue At layer #7 (0.64mm) swap to Blue Gray At layer #14 (1.2mm) swap to Beige

Border Only Colors from here until the end. At layer #25 (2.08mm) swap to Jade White for the rest.