Week 28 is here. First up is a set of bookmarks of Harley and Joker in line drawings.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 70.23x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 3 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #21 (1.76mm) swap to Jade White for the rest.