Play w this fully Printable Gun Pistol with 9 Bullets. Use a regular home Elastic Rubber Band to Power. Slightly pushed the Trigger when reloading to lock it in.

4 parts for the Gun Pistol in total. (Gunna Base - InnerPin for the Trigger & Reload Power) x the 9 printable Shots/Bullets

Total weight approx. 80-140g depending on filament, print settings etc.

Will be making upgrades shortly. Please add any comments and/or suggestions to this design. Would be much appreciated

9mm-Gun-Pistol-New-47a.stl

MAIN-GUNNA.stl

NO4 - Lampshade (thin) +  Socket Cover for regular E27 Light Bulb Socket Screw Ring Holder with shade diamater from 33mm to 35mm. Screw the printed top and bottom in between the socket rings. Easy lightbulb replace with open top.

(Lampshade) Top: height 20cm x diameter 10/15cm x total weight approx. 50g
(Socket Cover) Bottom: height 5cm x diameter 10cm x total weight approx. 40g

Note: Please scalethe bottom part height/z up or down to fit/hide socket etc.


NO4-Lampshade-47a.stl

2Top-Green-47a.stl

2Bottom-Green-47a.stl

N04 - Bio Bin / Trash Can. Self closing top. Super lightweight structure & scaleable files. Hidden extra space in the lit, to hide any plastic bag inside.

Image of the print is approximately 25cm (height) & 20cm (width) 

Please be aware of both uploaded files, TOP & BASE.

N04-BioBin-BASE-47a.stl

BioBin-TOP-47a.stl

N07 - Vase Single Flower Stems etc. Scale/slice to make it specific dimensions - width n height.

Image showing a print (x+y - width) 100% & (z - height) 120%
Height 18 cm x Diameter 12.5 cm - Weight 40g (printed with 2 wall loops & fuzzy skin 0.4+0.4)

Should be waterproof depending on filament and print settings being accurate and overlapping +70%.

N07-SingleStemVase-47A.stl

3vases-a2024.stl

N03 - Lampshade (thin) ridged cylinder fit for regular E14 (28mm) sockets - plastic screw ring light bulb holder. Height 170mm and diameter 124mm. Weight approximately 50g

NO3-Lampshade-E14.stl

v3-LAMPSHADE-E14.stl.stl

N06 - Small Travel case for Jewlery / Accessories. Cover/Case/Cylinder for protection/safety/storage. Total weight approximately 25g. 

Dimensions: Diameter 60mm - Height 41mm
Minimum 2 wall loops advised & 10-15 % infill.

Please be aware of the individual two files. BOTTOM & TOP



N06-Mini-Screw-CASE-47A.stl

TOP-Small-Bag-Jewelry-Screw-CASE-47A-.stl

N05 - Eyewear Travel Cylinder Holder Cover Case for Glasses/Sunglasses/Other protection/safety. Optimal total weight approximately 90g. 

Dimensions: Diameter 62mm - Height 170mm
Minimum 3 wall loops advised & 10-15 % infill.

Please be aware of the individual two files. BASE & TOP

N05-Travel-Cylinder-Eyewear-Case47a.stl

BASE-Cylinder-Case-Eyewear-47a.stl

N04 - Eyewear Travel Block Holder Cover Case for protection/safety. Optimal weight approximately 80-90g. Dimensions: Lenght 165mm - Width 60mm - Height 53mm

Minimum 2 wall loops advised & 10 % infill. 

Please be aware of the two files. BASE & TOP

N04-Eyewear-Travel-Case.stl

04-BASE-Cover-Case-Eyewear.stl

N03 - Small Organizer Block for kitchen herbs & spices. Size: height 45mm - length 140mm - width 60mm. Fit for three thin/regular sized cylinder jars/containers with a diameter up to 45mm.

N03-Herbs-Spices-BLOCK-3x.stl

Herbs-Spices-BLOCK-3x.stl

N02 - Lampshade fit for regular E14 (28mm) sockets - plastic screw ring light bulb holder. Height 180mm and diameter 160mm. Weight approximately 40g

N02-Lampshade-E14.stl

02-SHADER-E14.stl

N01 - Lampshade (thin) fit for regular E14 (28mm) sockets - plastic screw ring light bulb holder. Height 145mm and diameter 160mm. Weight approximately 60g

N01-Lampshade-E14.stl

01-SHADE-E14.stl

With hollow bullets. What do you think?

Printable Gun (Elastic Rubber Band Powered) 

35g

Single Stem Vase

Height 170mm x Diameter 124mm. Weight approximately 50g

  Height 170mm x Diameter 124mm. Weight approximately 50g

N03 Lampshade for E14 socket (28mm)

Diameter 60mm - Height 41mm

Small Travel Screw Case/Cylinder

1-2h printing time

Eyewear Travel Cylinder - Screw Case 

60g - 8h print

Lampshade

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

47A

Achievements

Seedling

Explorer

Designer posts