Erin B

Mini Paper Bag Gingerbread Houses (for tea lights)

by
3DPmom
Follow
Follow
Remix Model
3DPmom
3DPmom
|
Image 1 of 12
Mini Paper Bag Gingerbread Houses (for tea lights) 3d model
3DPmom
3DPmom
|
Image 1 of 12
Mini Paper Bag Gingerbread Houses (for tea lights) 3d model
2D
3D
Makes
Mini Paper Bag Gingerbread Houses (for tea lights) 3d model
Mini Paper Bag Gingerbread Houses (for tea lights) 3d model
Mini Paper Bag Gingerbread Houses (for tea lights) 3d model
Mini Paper Bag Gingerbread Houses (for tea lights) 3d model
Mini Paper Bag Gingerbread Houses (for tea lights) 3d model
Mini Paper Bag Gingerbread Houses (for tea lights) 3d model
Mini Paper Bag Gingerbread Houses (for tea lights) 3d model
Mini Paper Bag Gingerbread Houses (for tea lights) 3d model
Mini Paper Bag Gingerbread Houses (for tea lights) 3d model
Mini Paper Bag Gingerbread Houses (for tea lights) 3d model
Mini Paper Bag Gingerbread Houses (for tea lights) 3d model
Mini Paper Bag Gingerbread Houses (for tea lights) 3d model
This model is restricted by licensing terms. 

Inspired by paper bag lanterns, these little gingerbread houses print quick and easily bring a little Christmas spirit into your home. They also make great treat bags to give away 🍬

I have included three different styles: (1) Gingerbread House #1 (GBH_1) (2) Gingerbread House #2 (GBH_2) (3) Gingerbread House #3 (GBH_3)

3D PRINTING SETTINGS Layer Height 0.2mm PLA works great 15-20% Infill No supports needed

Dimensions of Gingerbread House #1: 2.5 in. X 4.5 in. X 2 in. Dimensions of Gingerbread House #2: 2.5 in. X 3 in. X 2 in. Dimensions of Gingerbread House #3: 2.5 in. X 3 in. X 2 in.

I have included a 3MF file with the following print plates: Print Plate #1: 2 colors (tan and white) Print Plate #2: 2 colors (tan and white) Print Plate #3: 2 colors (tan and white)

To print these in multi-color without a multi-color printer, add a pause print at layer height 1mm to change out the filament color (see photo).

To assemble, fold bags along fold lines, insert tabs into corresponding slots and secure the bottom closed (see photo).

Have fun printing!


54 Likes109 DownloadsNovember 4, 2024


54 Likes109 DownloadsNovember 4, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

MaterialPLA
Layer height0.2 mm
Infill density15 %
SupportsNone
BrimNo