Spermy
Hey all!
This is Spermy - the articulated... Well you know
He has 9 different heads, Happy, Cool, Speeding, Pumped, Shocked, Charging (With the little hand), romantic, stoned and Buffed! The head is attached using a tiny printable bolt that you twist in - I did it this way because I wanted these little guys not to have any flat area.
The head should spin exactly aligned with the flat tail area using some (not too much!) force.
I'm especially happy with the tail design as I designed the connections as ball joints instead of the "regular" thin cylinders that tend to break easily - So you can pretty much throw and drop him on the floor and he should not break even with a serios drop.
Romantic Spermy - Flowers are printed separately and can be colored by switching filament at layer height, flowers snap into the hands. He requires supports for his hands.
Buffed Spermy - He also requires some supports for his hands.
Stoned Spermy + Smoke - no supports, Push the smoke between the teeth until it sits firmly - You might want to put a drop of glue on it
All other parts no supports.
Print the screw with min. 3 walls and 20% infill.