Steel Dragon uses 10 colours. You can actually skip the Latte Brown if you want to as it only makes a very slight difference to the yellow hues. Frame not included.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 233x233mm in size. The depth is 5mm overall with blending depth of just over 4mm.
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA+ Esun Dark Blue Transmission Distance: 2 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA+ Esun Brown Transmission Distance: 1.5 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Dark Blue At layer #15 (1.28mm) swap to Charcoal Black At layer #16 (1.36mm) swap to Black At layer #29 (2.4mm) swap to Charcoal Black At layer #33 (2.72mm) swap to Brown At layer #35 (2.88mm) swap to Dark Brown At layer #38 (3.12mm) swap to Orange At layer #41 (3.36mm) swap to Yellow At layer #42 (3.44mm) swap to Latte Brown At layer #45 (3.68mm) swap to Bone White At layer #52 (4.24mm) swap to Jade White for the rest.