Gridfinity 4x1 Wall Mount Base.stl


this is a 5x1 **Gridfinity** compatible wall mounted base so that you can add **Gridfinity** modules to your tool wall.

Designed by Me - [please visit my YouTube Channel ](https://www.youtube.com/c/DIYTINKERER)

The Gridfinity concept was originally designed by **Zach Freedman**


Gridfinity 3x1 Base Wall Mount Reduced Filament.stl

This is a reduced filament, quicker print than my previous version. Use this to hold gridfinity 'modules' on the wall i.e. gridfinity can become part of your tool-wall.

Please visit my [youtube channel ](https://www.youtube.com/c/DIYTINKERER) :-) thanks !

Gridfinity concept by **Zack Freedman**

Wall-Mounted Shelf.stl

I designed this shelf because I don't have room next to my bed for a table, and needed a place to charge my phone at night.

For strength I used 1.6mm walls, and 20% infill. I personally used a brim, but that's only because I was having warping issues.

Creality Sprite ADXL345 Mount

Adafruit ADXL345 mount for the Creality Sprite Pro Upgrade Kit. You will need an Adafruit ADXL345 and (3) M3-6 screws.

Solar-Panel-Mount

This is a custom mount for a Offgridtec 20W solar panel. I designed this mount because I wanted to mount the panel in a 30° angle in my front yard.

The design is optimized for the [Offgridtec panel](https://www.amazon.de/gp/product/B07M6KT7VQ/) but can be easily remixed to fit on other panels too. 

Using PETG or a similar material is highly recommended to achieve enough strength and UV resistance in the mounts. 

Print the mounts on the side to preventing supports.

After printing, align the mounts to the side of the panel and drill 4 holes into the aluminium frame of the panel. Secure the mount with M5 screws to the panel. 

**Print Settings**
Printer: Creality Ender 2 Pro
Rafts & Supports: No
Resolution: 0.28
Infill: 100%
Filament brand: 3DJake
Filament material: PETG

VW T5 Cockpit mount

I needed to mount my monitor for my reversing camera. So I designed a mount for the unused Button locations.

Fuß.obj

Apple HomePod Mini Desk Mount

**Details**
I design this to clamp to a desk to clear up space. the clamps are made for 18mm mounting area. You can change the z scale to make it taller or smaller as needed. It has M3 holes, so you are able to use them to assembly and hold to the desk. I printed it in ABS at .2 layer, there is no need for supports.  You will need to print two clamps for it.

If you like to support me please go follow me on TikTok blake3dprinting[](https://www.tiktok.com/@blake3dprinting?is_from_webapp=1&sender_device=pc) 


All of my Designs are covered by a Creative Commons Non-Commercial License.  Sale of prints using my designs are the sole right of myself, and those I license to do so. By downloading this design you are agreeing to these terms. Please understand every design is hours of work and multiple prototype prints to ensure quality.  Unauthorized sales will result in new designs not being made public.


Ender 6 Top and Bottom Ball Screw Mount

Ender 6 Top Ball screw mount.stl

Motor Mount for goldguy's Nutball

This motor mounting plate is for goldguy's Nutball RC air"plane".

It already incorporates the 5 degrees down thrust and 3 degrees right thrust. Additionally, it features a pass-through hole for the motor wires.

The front face is approximately 35mm x 35mm.

VR sensor mount.stl

This is a remake of a mount for Vive sensors 

Printed in: PETG
Infill: 20-40%
Supports: none

vc sensor mount.stl

Oculus Quest 2 Controller Hanger

This is a model for a small wall-mounted hanger for a single quest 2 controller. It is symmetrical, and can also be printed without support if you rotate it a bit, I'm sure you can get it going. I printed this with PETG @235/80 5mm brim, 0.8mm nozzle, 60mm/sec on my ender 3 pro with a volcano hotend.

Ender 3 Blower Fan Relocator

Relocates the ender 3 side mount blower fan to the top of the extruder with outlets on both sides for better cooling

LEGO Minifig Hexagons Wall Mounts

lego-minifig-hex-mount-top.stl

IP67-LED-STRIP-CLIP.stl

This is a simple screw mount for IP67 LED strips. I designed it for my SK6812 IP67 60  RGBW strip to mount it at my garden cottage.

The screw holes are designed for 4x30 mm screws but a smaller size should work as well. The width of the mount is about 10 mm and fits perfect between the LED's of a 60 LED's per meter strip

**Print Settings**

- Printer brand: Creality
- Printer: Ender 3
- Rafts: No
- Supports: No
- Resolution: 0.2
- Infill: 100%
- Filament brand: 3DJake
- Filament color: Black
- Filament material: PLA

W5100S-EVB-Pico Holder

This is a holder for the WIZnet W5100S-EVB-Pico clone with Ethernet built in. After headers have been attached it should slip in and pop down securely enough to stop movement, but it can still be pulled out. The holder can be taped or glued.

mount

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gridfinity 4x1 Wall Mount Base.stl

Gridfinity 3x1 Base Wall Mount Reduced Filament.stl

Wall-Mounted Shelf.stl

Creality Sprite ADXL345 Mount

Solar-Panel-Mount

VW T5 Cockpit mount

Apple HomePod Mini Desk Mount

Ender 6 Top and Bottom Ball Screw Mount

Motor Mount for goldguy's Nutball

VR sensor mount.stl

Oculus Quest 2 Controller Hanger

Ender 3 Blower Fan Relocator

View 16 new models

IP67-LED-STRIP-CLIP.stl

W5100S-EVB-Pico Holder

Caution Hot Mounting clips

X301-BL_Touch.stl

Biqu H2 - 5015 Fan and Bltouch Mount + Duct

Simple Caliper Desk Mount

View 12 new models