This is a robust curtain rod bracket I designed to replace the metal ones that kept bending under the weight of my full length blackout blinds. It prints without support if you print it on it's back. I printed mine solid for added strength, but that probably isn't necessary.

15mm - Half Inch Curtain Rod Bracket

This fits a flag with a 3/4" pole. I designed it because the cheap mount that came with my flag broke during the first windy day we had, so I designed something much more robust. I printed mine solid, which used about $3 worth of filament, but it is robust. I would probably be fine printed with infill just using thick walls, but I wanted something that would last.

45 Degree Flag Mount

This is a print friendly version of a KNEX Coaster Sprocket Gear compatible with the Micro Chain.

KNEX Coaster Sprocket Chain Gear

This is designed for a door frame mounted Pull-Up Bar, like the ProsourceFit Multi-Grip Pull Up / Chin Up Bar. My bar pressed down against the frame and damaged the door frame, so I designed these feet, which work best when printed with TPU, they protect the frame, and absorb any shock from the pullup movement on that point. It fits over a one inch diameter tube.

Pull-Up Bar Foot Pad 1"

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4632322.

This is a stand designed to hold the MYNT3D Pro Pen.  I believe it will work with the Super as well but this is not tested.  I do not know if it will work with the Basic.

No Supports necessary if overhangs are set to 48 degrees or more.

I recommend printing in a color other than black, and ideally with PETG or something with a higher glass transition temperature than PLA, but PLA will work in a pinch.  In my initial design I did not have a vent, and I noticed that if the pen was kept on in the cradle it heated up the chamber.  I added a vent, and printed in translucent red PETG, and it seems to handle the heat fine even if I keep turning it on to stress test it.  With the vent, PLA is probably okay, but I'd stay away from black because it absorbs heat.

Check out my website, www.CinemaTechnica.com



MYNT3D Pro Stand

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like