Wire Skull // Deer

DeerSkull-full.stl

USB_Extensions_Mount

Sturdy Simple Top Loading Spool Holder

simplespool-top.stl

A Sturdy Simple Spool Holder

simplespool-legs-1.stl

Simple Rod mount 3D model

This shower curtain rod holder is a solution to bathroom curtain holders that keep falling; the design includes simple rods that are meant to be glued to the wall with double-sided tape.

The print settings for the shower curtain rod holder include: a Creality Ender-3 v2 printer, no rafts or supports, a resolution of 0.2, an infill of 35, and PLA material for the filament.

Based on [this](https://www.thingiverse.com/thing:6088755) model from lithium366. Slightly modified, added some texture with the help of this tutorial on [Blender displacement maps](https://hum3d.com/blog/displacement-maps-in-blender-tutorial/). 

Please feel free to leave comments. I would be grateful for the likes, I hope it will be useful to someone.

Simple Rod mount 

Leap Motion 2 Halter/Mount for Valve Index

leap motion2-halter_valveindex-1.2.stl

Magsafe Stand for iPhone and Airpods

Single or double magsafe charger for iPhone and Airpods

MagsafeV1.STL

2020 Extrusion Pivot/Hinge - 90deg

Nema17 fan heatsink mount.3mf

I found Wired1's solution https://www.thingiverse.com/thing:29572 most suitable for my use. Then the heatsink I ordered arrived and I wanted to add that in for an additional cooling effect. 

(FYI, the addition of a heatsink to the motor only reduced the motor temperature by around 5℃ to 8℃ for me, whereas adding a fan lowered the motor temperature by around 20℃.)

Minor changes:
1. Increased the depth to allow <12mm heatsink to be pasted on. 
2. Added some holes in the hope of increasing airflow. Inconclusive so far.
3. Changed the mounting hole to take M3x3 (M3 OD 4.5mm, 3mm depth) threaded inserts.

*****

Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s 

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you) 

AliExpress affiliate links:
NEMA17 heatsink
https://s.click.aliexpress.com/e/_DEoMaQp

Threaded brass inserts 
https://s.click.aliexpress.com/e/_DB22QVP

Amazon affiliate links:
NEMA17 heatsink
https://amzn.to/3Nruji9

*****
Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j

Paper towel holder print-in-place

Papertowelholder_0.3_left.stl

Vex 9V Battery Mount

This holds a 9V battery upright with 2 holes in the bottom to screw into Vex plate.

Vex Arduino Uno Mount

This was designed to hold an Arduino Uno to a Vex plate.

Bicycle bidon or cargo mount adapter

HMG7.2 Sovol SV01 BMG Mirrored Mount.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: MediaMan3D@gmail.com

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Sharper Image Massage Gun Wall Mount

Sharper Image Massage Gun Wall Mount (v2) - Mount.stl

Anderson plug holder.stl

**NO SUPPORTS NEEDED**
where I live people use Anderson plugs in the back of their Ute's (pick up trucks for the americans) for their off-Roading adventures. I made this model about a month ago and so far I've sold them at $15 each and made a total of about $650. just use 2 screws to attach it to a wall or other vertical surface and then slide in your Anderson plug (might need to force it in a few times before this process to make is clip in easier when mounting) this model is friction fit and with how tight it is, it has been way more than enough but if you feel the need you can use the built in screw holes that line up with the holes in the plug as well to screw it in for extra security. 
Good luck printing and enjoy!

Extrusion Mount Spool Holders

2020Arms.stl

Magnetic Headphone Stand

Arm.stl

GT Omega Cockpit Sim Racing Rig Adapter For Beavis Racing Shifter and Handbrake

This is an adapter plate used to attach the 3D Printed Beavis Racing sequential shifter and a handbrake to the small mount included on GT Omega brand sim rig frames. This plate will likely work for a variety of other cheap sim racing rigs including brands like Minneer, Vevor, Marada and Anman

MS DD Linear rail mount for Creality / Ender printers

Made this a full size version from my original that is also here on Thangs.
Minimal supports needed. I block the nut recessed areas, they don't need support but the slicer will want to put them there.
I included some pics of the blockers and the supports form Cura.
Printed with .2mm layers.
Recommend 1.2 mm walls and top, I went with 3mm on the bottom, this gave it a nice rigidity for the belt grooves. 
Pop in the M3 nuts after printing and secure them in place with a screw before installing on the printer, this will seat them well and let you know if you have an issue.
All the holes are in the same locations as the MS metal version, so attachments like CR or BL touch can be added without any issues, as well as fan shrouds.
I flipped the hook on the right for the wiring (ender 5 MS plate has this), it made more sense to me the way I have it.
You still need the Micro Swiss extruder hardware for this to work, if switching from rollers to linear rails and you already have a MS DD extruder, then this is perfect for you.
Pica aren't the best but you get the idea.


mount

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 72 new models

USB_Extensions_Mount

Sturdy Simple Top Loading Spool Holder

A Sturdy Simple Spool Holder

Simple Rod mount 3D model

Leap Motion 2 Halter/Mount for Valve Index

Magsafe Stand for iPhone and Airpods

2020 Extrusion Pivot/Hinge - 90deg

Nema17 fan heatsink mount.3mf

View 31 new models

Vex 9V Battery Mount

Vex Arduino Uno Mount

Bicycle bidon or cargo mount adapter

View 510 new models

Sharper Image Massage Gun Wall Mount

View 11 new models

Extrusion Mount Spool Holders

Magnetic Headphone Stand

GT Omega Cockpit Sim Racing Rig Adapter For Beavis Racing Shifter and Handbrake

MS DD Linear rail mount for Creality / Ender printers