APC 1500 UPS Feet - Stand.3mf

This is a base / stand / foot that allows a rack-mountable APC 1500 UPS to stand stably on its side if you will be leaving the UPS on the floor

PEGBOARD MADNESS

RTK-PEGS-Rightbase.stl

Magsafe Monitor Stand Mount

This is a mount for an Apple iPhone Magsafe charger to attach to a round post from a monitor stand. 

[This is the monitor stand I have](https://www.amazon.com/gp/product/B09LJ146CT/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1), although you could adjust the mount end of the model for whatever you are trying to mount to.

I prefer to design my parts with little or no supports, so the arm of the mount is split into 3 parts. Everything can be assembled with M4 screws and nuts.

I am using a 3rd party charger, but the dimensions are the same as the official Apple Magsafe charger.

Tube Hanger for 1" PVC

A simple tube hanger for 1" PVC. Filleted inlet for easy placement. Multiple screw holes for different mounting. Just made this for a filament drying box. 

Y-axis motor mount

On my Voxelab Aquila X2, the y-axis mount melted, because most likely I set the wrong current to the motor. The shape of the carriage had to be changed, slightly to make it necessary to use less support. The holes are not symmetrically located, just like on the original part. That's how it should be. I printed in the position shown in the last photo. 

The carriage is made of sixth grade nylon with 30 percent glass filling.

I recommend printing with 35% triangle infill and 3 perimeters. Layer height 0.2 mm

Kinematic Bed Mount Coupling With Magnetic Preload for SolidCore 3D Printer

UK Plug Holder Grid

6 Plug.step

Screwdriver Holder with spot for Stanley Knife

Screwdriver Holder 1_1.stl

Costume Wing Mount - HalloweenWearable

I made this HalloweenWearable to support costume wings! 
It utilized two telescoping poles and can be mounted with sturdy thread. I have it mounted to a posture corrector because I found it provided the best support but the whole setup is extremely light and can be mounted to just about anything that's securely fastened to your body.



Costume Wing Mount 

Spray Bottle Hangar 

This is a Spray bottle hangar I designed around a basic idea with a strict guideline. 
No brim, rafts or supports required.
These are capable of holding 1KG and can withstand roughly 1G of force applied to them In this revision if you have good layer adhesion. Printed upright I found minimal to no stringing even on an untuned machine. This is a 1-2 hour print depending on the machine. Light on material and strong I print this at 3 wall, 3 top/bottom and 10-20% infill. Tested in Esun PLA+ and in Esun PETG. Please share with attribution and give feedback as this was my first design taken to testing and commercial phase. Some early concepts are in photos and had many issues, early revisions can be provided if wanted for some reason. Best mounting practice is 2 x 8G 16mm Button heads, Remove mouse ears after print.
 

** Update
V1_6
Re sketched and reformatted some of the features for increased slicer reliability and modified how the different facets of the design interact. This has reduced file size from  9.64Mb to 1.06Mb. Changed Mouse ear generation from eye balled placement to a grid deploy and changed the 2 sides from separate sketches to a mirrored sketch increasing the symmetry by 0.05mm. 
Again any issues or notes please comment, Makes are always appreciated. 

EZPZ Pegboard Hook // 20mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

magnetic monitor phone mount

comsol mag charger mount.stl

Nordlux Attach Decoration Hook Mount

Nordlux Attach Light Track Decoration mount. Hook / Eye.

DK: Til at montere pynt i loft lysskinner fra Nordlux.

EN: For mounting decorations in a ceiling light rail/track from Nordlux.

EZPZ Pegboard Hook // 25mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Axis M3045-V Mount for Grid Tile T-Bar

Axis M3045-v grid tile mount base.stl

Generic LED Desk Lamp Remote Holder

Remote Holder V1_2.step

Zørp-O'-Lantern Bust Stand

Here's a nice stand for your [Zørp-O'-Lantern head](https://than.gs/m/939862) ([alt](https://than.gs/m/941237))! The neck is angled so you can make the head tilt in different directions based on how to orient it.

Swap filament at 2mm to distinguish the base from the neck. You can glue the head in place or just leave it loose on the stand.

Photographed model was printed at 180% scale using [Polymaker PolyTerra Matte PLA](https://amzn.to/3PHOxFA) ([US direct](https://bit.ly/polyTerra))

mount

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

APC 1500 UPS Feet - Stand.3mf

PEGBOARD MADNESS

Magsafe Monitor Stand Mount

Tube Hanger for 1" PVC

Y-axis motor mount

Kinematic Bed Mount Coupling With Magnetic Preload for SolidCore 3D Printer

View 24 new models

Screwdriver Holder with spot for Stanley Knife

Costume Wing Mount - HalloweenWearable

Spray Bottle Hangar

EZPZ Pegboard Hook // 20mm Hook Type B

EZPZ Pegboard Hook // 10mm Hook Type B

magnetic monitor phone mount

Nordlux Attach Decoration Hook Mount

View 17 new models

Axis M3045-V Mount for Grid Tile T-Bar

Generic LED Desk Lamp Remote Holder

Zørp-O'-Lantern Bust Stand

Controller and Headset Wall Mount v2

Telstra TV (Roku 4200TL) TV Hanger