A simple wall mount enclosure for the Elecrow 7inch touchscreen and Raspberry Pi 4B mounted on the back with PoE hat. Can be mounted to the wall in any direction with the mounting slots.

Takes two M2.5x12 and two M2.5x4 to mount to the back of the touch screen.

OnShape project [here](https://cad.onshape.com/documents/4222d7943f6eac6b572cbde4/w/9c28ed98eea1a205b003a0ce/e/d4e2f695cb3beede0677bd85?renderMode=0&uiState=65a31d30cb000a3f2d7f5a8a)

Enclosure Mount for Elecrow 7 Inch screen and Raspberry Pi 4B with PoE

Elecrow 7 Inch Pi 4B PoE Enclosure.3mf

Elecrow 7 Inch Pi 4B PoE Enclosure.step

A simple wall mount bracket for the Elecrow 7inch touchscreen and Raspberry Pi 4B mounted on the back with PoE hat. Can be mounted to the wall in any direction with the mounting slots.

Takes two M2.5x12 and two M2.5x4 to mount to the back of the touch screen.

OnShape project [here](https://cad.onshape.com/documents/4222d7943f6eac6b572cbde4/w/8acca6989d116c24a060c20a/e/d4e2f695cb3beede0677bd85)

Bracket Mount for Elecrow 7 Inch screen and Raspberry Pi 4B with PoE

VESA mount adapter for mounting a Hue Play Lightbar above the mount between the monitor and the mounting bracket using 100mm VESA mount spacing.

Specifically modeled for use for the following monitor arms and monitors, but may likely work with others:

- [LG UltraGear 27GL83A-B](https://www.amazon.com/gp/product/B07YGZL8XF)
- [Mount-It! Triple Monitor Mount](https://www.amazon.com/gp/product/B01M2AJMOH)

OnShape CAD document can be found [here](https://cad.onshape.com/documents/78505d1b5e4cfcc59b95ce22/w/359edbb9b75b85e0b02eb08f/e/4422712c235156a72773de50?renderMode=0&uiState=65557fb514d3b36435c103de), and has parameters to vary rise from the bracket (set to 6.6mm for this monitor) and vary the added height of the light bar from the mount (set to 4mm just to give some space). Could likely be adapted to other lightbars as well.

The nubs/clips at the ends of the arms don't specifically need supports, and seem to work without.

Hue Play Lightbar VESA Mount

Hue Play Lightbar VESA Mount V3.step

Just a little lamp I threw together. Lamp shade part is 140mm in diameter and 200mm tall (above the middle rim). Total diameter is 160mm and total height is 270mm. The shade thickness is 2 layers thick when printed with a 0.4mm nozzle.

The inner hole is 36mm and should be able to hold any 35mm lamp socket and the lip/rim is 10mm thick.

The hole for the cord is 7mm.

I used the following non-printed parts:

- Socket: https://www.amazon.com/gp/product/B06Y3514QR
- Cord: https://www.amazon.com/gp/product/B07R5Y14JM

Model is fully parametric and the 140mm version can be found here: https://cad.onshape.com/documents/c9bd87705a6023010f14f0f4/w/4b7cff9be9396b95675c1752/e/598ab140a929a380f50d4e0b?renderMode=0&rightPanel=variableTablePanel&uiState=6517ba270fd8433c20a1dbdd

Lamp - 140mm Diameter

Lamp - 140mm.3mf

Lamp - 140mm - Shade.step

Lamp - 140mm - Base Rim.step

Lamp - 140mm - Base.step

Just a little lamp I threw together. Lamp shade part is 100mm in diameter and 125mm tall (above the middle rim). Total diameter is 120mm and total height is 195mm. The shade thickness is 2 layers thick when printed with a 0.4mm nozzle.

The inner hole is 36mm and should be able to hold any 35mm lamp socket and the lip/rim is 10mm thick.

The hole for the cord is 7mm.

This was the smallest viable size I used for testing the print. The larger-size version can be found here: https://thangs.com/designer/brwyatt/3d-model/Lamp%20-%20140mm%20Diameter-940666

I used the following non-printed parts:
- Socket: https://www.amazon.com/gp/product/B06Y3514QR
- Cord: https://www.amazon.com/gp/product/B07R5Y14JM

Model is fully parametric and the 100mm version can be found here: https://cad.onshape.com/documents/f2c56c1f25f54c8c8aa0a7dc/w/3fd6d3eefb254ce4bfcc4399/e/5a4406f52037ae857f2e26d4?renderMode=0&rightPanel=variableTablePanel&uiState=65173e528bd7777d43191d39

Lamp - 100mm Diameter

Lamp - 100mm.3mf

Lamp - 100mm - Shade.step

Lamp - 100mm - Base Rim.step

Lamp - 100mm - Base.step

Kinda new to this and having fun learning to design my own objects and parts. Hope to get to a point I can just design and print things I need, when it makes sense to. I'll try and upload things I design and make if/when I can and share back to the community that's made so much I can use already!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

<div class="markdown"><p>Kinda new to this and having fun learning to design my own objects and parts. Hope to get to a point I can just design and print things I need, when it makes sense to. I&#x27;ll try and upload things I design and make if/when I can and share back to the community that&#x27;s made so much I can use already!</p></div>

brwyatt

Pinned models

Lamp - 140mm Diameter

Enclosure Mount for Elecrow 7 Inch screen and Raspberry Pi 4B with PoE

Bracket Mount for Elecrow 7 Inch screen and Raspberry Pi 4B with PoE

Hue Play Lightbar VESA Mount

Lamp - 140mm Diameter

Lamp - 100mm Diameter