Modular Toolbox Tray Organizer

Tray for Tool Box Compartments Bases Frikarte3D.stl

Dewalt Battery Holder

Dewalt Battery Holder.stl

Orchid pot insert

Orchid planter140x140.step

Sewing spool container insert (130mm x 92mm) 

sewingSpoolContainerInsert.stl

MultiBoard MAG-BOLTS

MultiBoard_MagBOLT_BigThread_FlatHead.stl

Heat set Helper

Base.stl

Ribbon Gift Box A Lite with ribbon loop and slot | Insert for AA batteries | Christmas gift box

LID_Gift Box A Lite_ribbon_03fit_karenchaudesigns.stl

Christmas Ornament Collection 2023

Orn 5.stl

Small Gift Box w/ Insert for up to 8 AA Batteries

gift box lid_AA batteries_8x2slot_karenchaudesigns.stl

Candleholder insert

candleholder-insert.stl

E5 Panel Insert.stl

Replica of the extrusion inserts that came with the Creality Ender-5 S1 Pro acrylic panel kit.

I lost some and figured there's a chance others may suffer the same fate. 

I recommend printing in orientation pictured (and should be model's default). Small amount of support required for the underside of the prong (see picture). Only minor bridging required without.

Print pictured was printed with a 0.4mm nozzle, probably would be fine with 0.6mm too.

If you have also lost the square nut a normal M5 hex nut should fit too. That's what I used.

Overture Spool Insert

Spool insert for Overture's cardboard spools.

This insert allows the spool to work with bearing-based support spool holders.  This insert is also compatible with the Spool System by sideways design found on Thingiverse.
https://www.thingiverse.com/thing:1002299

Be sure to print this with the lip of the insert on the print bed.

Noob Knob Version 3 upgraded to thermal insert

The Noob Knob was in need of a major update. My first one was designed almost 10 years ago. It's still a 50mm diameter 5 knob handle, with 15.2mm overall depth. This also is still threaded for 1/4" x 20. This new version will now work with thermal set threaded inserts. The inserts are available at Mcmaster Carr https://www.mcmaster.com/93365A162/

These work well being printed in your favorite thermal plastics, from PLA to Nylon. This is a print in place, no supports needed model. I would recommend having several perimeter walls in up the strength and feel of the knob.

Noob Knob

Our team need about 100 knobs to complete a project. Trying to buy the knobs locally was costly and limited stock. We decided to draw it up and print them. This was my first attempt at creating threads. The knob is 50mm with 5 arcs for finger grips. The knob accepts 1/4"-20 x.472 insert nuts.

Concrete candle holder “Gugelhupf”

**A beautiful concrete candle holder – easily produced at home**
Candle diameter: 16 mm - 26 mm

**What you need**
- TPU filament
- Hobby grade pouring concrete
- Water
- Optional: Acrylic colors
- Optional: Vaseline or kitchen oil

**Instructions (also check images)**
1. Print the mold in TPU – I you have not yet printed this material, check YouTube for instructions. It’s quite easy even with a beginner machine like a Ender 3V2
2. Mix the concrete according to the instructions of the manufacturer
3. Optional: Add acrylic colors to the mix
4. Optional: rub the inside of the mold with Vaseline or kitchen oil for easier separation later
5. Pour the mix into the mold
6. Optional: Bumb the filled mold lightly on your table to get rid of air bubbles
7. Wait until the mix dried. Note that the acrylic color might add to the time it takes to fully dry.
8. Remove the cast by inverting the mold and pulling it out
9. Optional: Paint the cake
10. Have fun!

Size of the finished holder: 89 x 89 x 41 mm
Don't forget to post your makes

**Print settings**
Required build volume: 100 x 100 x 60 mm
Material usage: 40g
Print time: 4h

Material: TPU 95 – other shore hardness down to 80 should work, too – but are not tested.
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Bandsaw Table Insert

Agazzani makes high-quality industrial bandsaws in Italy. But when the table inserts (also called throat plates) get damaged or lost it can be hard to find replacement parts, especially dealing with international shipping.

Eagle Tools gave me an aluminum one and asked if I could make a replacement version in plastic. I told them I thought I could machine an aluminum version, but they said they'd prefer stiff plastic so if the blade nicks it the blade is not damaged. 

The original had M5 set screws for precisely adjusting the height/level from the top, so I tapped this to fit the same screws and they work perfectly.

I printed this in ASA, but I think would also work well in ABS, PETG, Nylon, TPU, or PLA.

Trumpet MP Adaptor for Multipiece Mouthpiece

If you have one of those Multipiece Trumpet Mouthpieces that have the inserts in them but are useless as a mouthpiece. try this adaptor insert.
Screamer type V type. I've been experimenting with the shape and style. 
feel Free to use this and continue to what you come up with the thangs.

Leggy Cup Holder.3mf

Insert for couch cup holder to allow for larger cups, mugs or bottles. 

Thread Insert Tool

Slim Azul tray

A slim tray to store the discarded tiles.
Refilling the bag has never been easier!

 
**Support / Reseller**
If you want to support me or sell my models, take a look at my Patreon:
https://www.patreon.com/thomash3d

You can also send me a tip on paypal:
https://www.paypal.me/thhen

insert

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Modular Toolbox Tray Organizer

Dewalt Battery Holder

Orchid pot insert

Sewing spool container insert (130mm x 92mm)

MultiBoard MAG-BOLTS

Heat set Helper

Ribbon Gift Box A Lite with ribbon loop and slot | Insert for AA batteries | Christmas gift box

Christmas Ornament Collection 2023

Small Gift Box w/ Insert for up to 8 AA Batteries

Candleholder insert

E5 Panel Insert.stl

Overture Spool Insert

Noob Knob Version 3 upgraded to thermal insert

Noob Knob

Concrete candle holder “Gugelhupf”

Bandsaw Table Insert

Trumpet MP Adaptor for Multipiece Mouthpiece

Leggy Cup Holder.3mf

View 12 new models

View 11 new models