Samsung Galaxy S26 Ultra Case Version1

SGS26UltraCaseVersion1.stl

Page Turner foot pedal 2 USB keyboard

2ButtonPageTurnerLayout.stl

Lyre Samsung Galaxy note 10 plus Phone Case

Lyre_S10PhoneCase.stl

Lyre_Case_Addapter

Lyre_Case_Addapter.stl

Page Turner from 4 key pc keyboard USB

4Key-StepPedal-4Printing.stl

SourceX Antenna Mount for Big VTX with FAN

I modified the one that was already on Thiniverse so that it would better allow the fan of my Big AKK VTX to have maxium effect.
This model allows full flow of air accross the fan and the top of the VTX unit.
The AKK VTX unit is mounted to the top plate of the SourceX frame to allow easy access to the buttons of the VTX.
the 2812 LED Controller fits under it and allows access to the buttons.
its a remix but I can't find a link to the original file.

TBS SourceX GPS holder

This is a GPS Holder for the TBS Source X drone.

TBS SourceX Camer Control holder

At the bottom of the TBS SourceX frame there is a square hold below the FPV Camera.
This is a great spot to put a camera control for the FPV Camera. It fits in nice and tight and the control unit goes in on top. Then screw in the top pad part.
The pad allows the buttons to be pushed but keeps the unit water resistant from Rain. etc.
to make a better seal just put sold glue at the front and sides between the two parts.
Fits the Foxeer Camera 5 button perfectly, but will also fit other models. 
Print with TPU so that you can use the buttons.

Zorro Phone holder with VRX Module bay

ZorroHolderPhonewVRX_V4.stl

Trumpet MP Adaptor for Multipiece Mouthpiece

If you have one of those Multipiece Trumpet Mouthpieces that have the inserts in them but are useless as a mouthpiece. try this adaptor insert.
Screamer type V type. I've been experimenting with the shape and style. 
feel Free to use this and continue to what you come up with the thangs.

Screamer Trumpet Mouthpiece

Screamer Trumpet Mouthpiece,
I put this together as an experiment to find the right sizes for me while looking for a mouthpiece.
I've made the bore a little smaller so that you can drill it out to the size that you want. just start with a small drill bit and play the mouthpiece, repeat this until you have the feeling that you want from it.
I've printed mine with 10 top layers and at 90% in PETG so that I can modify it easily after its printed. sand it and smooth it with a hot air gun to get best results.
I turned out to be a good mouthpiece and I can easily blow across the total register, pedals up to above high F with it.
I'm not a professional, just a hobbyist trying to find what works for me.
it would look better in ABS filament, then smoothed with acetone. but I don't have any ABS filament.
Have Fun.

Wedge Screamer Trumpet Mouthpiece

Wedge Screamer Trumpet Mouthpiece,
Just for fun.
I put this together to play with different ideas and to find what worked for me.
I printed mine in PETG with very small bore then this allowed me to drill out the bore until I got the feel i wanted from it.
Sanded it down and used a hot air gun to smooth the surface. I printed this with 10 top layers and 90% infill allowing me enough room to alter the mouthpiece with a blade until I got what I wanted. I've made this a wedge shape just to experiment with the idea.
I've designed it so that you get a different effect if you turn the mouthpiece 180 degrees. Have fun.

Buzz Ring

The Buzz Ring,
This device is used to increase the range on brass instruments, and to improve your buzz.
There are many on the net that are just cut down trumpet mouthpieces, but who wants to damage a mouthpice or pay alot of money just for a rim?

check out youtube and search for trumpet rim buzzing for more info on how to use it.
I've printed this with a extra wide rim for comfort.
I printed mine in PETG with 10 layers on the top at 90% so that it was water tight and to stop any issues with muisture and bacteria.
When sanded smooth it should be very water tight.
I've also included a hole in it to allow a string or wire to go through to ware it around your neck or on a keyring.


Buzz_Ring.stl

Violin Practice Bow Tool

This is better then a pencil.
This is a tool to help students with practice when using the any string Bow.

Anzac Day Two Up Paddle with Storage and Display Box

ANZAC DAY 2 UP version 2 Paddle with Box

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

anzacmobile

Achievements

Seedling

Fan Favorite