Geometric planter

little geometric planter printed upside down, no supports.

Owl planter with tree stand

Owl.stl

Watering Can

Hey, I'm glad you found my watering can.
Print this with the supports you like. I personally use tree supports only touching build plate.

Garden Veges

Gracewindale-sunflower-b.stl

Low Poly Zig Zag Planter

ZigZagPlanter.stl

Planter castle

**A castle inspired planter with water drainage via the moat.**

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 153 x 157 x 102 mm with a inner size of ca 96x96x90mm and a wall thickness/small feature diameter of 2mm minimum
- Downscaling (99% – 61%): works great
Minimum size (60%):  62 x 65 x 61 mm with a inner size of ca 58x58x54mm and a wall thickness/small feature diameter of 1.2mm minimum
- Everything smaller than that is not tested but maybe possible :D

Don't forget to post your makes!

**Print settings**
Material usage (100% scale): 200g
Print time: 16h (100% scale): 16h

Material usage (60% scale): 50g
Print time: 16h (60% scale): 5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, callibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

Castleplanter.stl

Hydroponic Aeroponic Garden Tower

Planter

Planter.stl

Elephant watering can 

watering can.stl

Watering can

watering_can_1,3L.stl

Maple Stump Planter or Container

This was a idea I had while thinking about what to make. I put a small maple tree into a maple tree shaped planter.

this was my first shot at sculpting and I am really happy with how it turned out. i

I printed mine with walls, 0% infill(this may cause issues TBD but use more walls to help the potter last longer). I always use a brim but you may not need to. I printed mine smaller by about half because I am cheap.

Do Not Overwater

Honeycomb Planter

A 3D Printable Honeycomb Planter.

Print time: 4.5 - 5.5 hours
Size: 9.5 x 6.6 cm (diameter x height)
Weight: 65 grams

If you have questions, please let me know. I am happy to help.

Happy printing 

3D printing settings

0.25mm layer height
0.6mm layer width / wall thickness
2 walls - 10% infill
40mm/sec print speed - 120mm/sec travel


Butterfly Stand for planters and stuff!

Butterfly Base.stl

Garden Windmill

Garden Windmill.STEP

3 little planters

Pot waffel design.stl

Self-Watering Planter Addon

This is a fantastic way to turn a normal plant pot into a self-watering plant pot. To set this up, just push it into the soil and put water into it. I'd really appreciate some feedback while you're here because it would help me know what you want to see next.

Low Poly Eevee Planter

**Low Poly Eevee  Planters **

I've only printed this model in FDM so far. No supports needed. They are currently at the MAX scale that I could fit on an Ender 5 Pro (220x220 build plate), but you can scale up or down as you please.  I've printed as small as 50% and they looked fine to hold a small succulent.  Any smaller and you might not fit anything in it!

**Here Are the Settings I Used to Print:**
Nozzle: I printed with 0.6 mm with no issues.
Infill/Perimeters: I personally use 10% infill with 2 perimeters and have no issues.
Supports: None

**Post-Processing/Assembly:**
None needed, but I personally spray them with a UV protective coat after printing so they retain their color longer!			
			
			
			

Stackable Basic Planter

I made this Planter because I needed a few and didn't want to go to the hardware store.
I would not recommend printing this in huge numbers, they are a looot cheaper to buy.
Print in PETG or anything else UV resistant if you want them to last.
The triangle holes at the side are for water. Normally, Pots sit on small ledges, but that would require an unnecessary amount of support filament. This way, water can still get inside.
#OutdoorThangs

gardening & landscaping

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Geometric planter

Owl planter with tree stand

Watering Can

View 143 new models

Low Poly Zig Zag Planter

Planter castle

Hydroponic Aeroponic Garden Tower

Planter

Elephant watering can

View 31 new models

Maple Stump Planter or Container

Honeycomb Planter

View 10 new models

Garden Windmill

3 little planters

Self-Watering Planter Addon

View 28 new models

View 17 new models

BonsaiPotV2.stp

View 14 new models