0% INFILL!! - Marker Holder - Marker Stand

This is a zero infill marker holder / marker stand for common permanent makers 13mm or smaller diameter. 

Prints in less than 10 hours on most printers with .4 nozzle and .2 layer height.  Prints in half that time with a .6 nozzle and a .333 layer height.  Sturdy and unique design. 

This holds 30 markers each.  Allowing you to create groups based on colors or tone.  Optimizes your color workflow. 

The main model image was printed in color changing PLA.  https://amzn.to/3WGIO4h

8.9" LCD Enclosure for Handheld PC

LCD_assembly.stl

Creality Water Cooler Fan Support and Duct

Ender 3 Water Cooler Fan Support and Duct

Creality Spider Speedy hotend

PrintABlok Base Bloks

MagneFlex Prusa Isolation Feet - Gen1

MagnetoFlexaFoot v4.step

Flashforge Creator 3 Lid block

This fits loosely in the recess for lifting the lid - doesn't completely block it but it has helped me get the chamber heated quicker for PA-CF and PA.

TBS Source One V5 Vifly Finder 2 Buzzer Front Mount

Raspberry Pi Display Monitor 7" Screen Box RPi Enclosure Case

Magazine Rack or Holder

Voxel PLA Spool Tower

A stackable spool tower designed for Voxel PLA Spools.

Funky SD/microSD Card Tree

GD_SD_Tree_2.step

Filament Clip

Reinforced Spiralized Gridfinity Bin

Reinforced Spiralized Gridfinity Bins

Domp Truk - 3D Printable Not-A-Tonka Truck

Fun project that requires no fasteners or glue, just a 3D printer and some filament! Can hold 2 filament rolls! Enjoy!

After a comment requesting 2 slight changes, I've updated the print files slightly. The slits now print 5 on each side, so the finish is the same (straight from the 3MF file).

I also added an additional Domp Truk Tag so that you can add one to both sides of the bed so that it holds everything together better. I reduced the length of the Tag by 2 mm so that they wouldn't touch in the center. Otherwise, everything else is the same.

Original Post

Whether you're looking for a fun project to do with one of your kids or you're just a kid at heart, the Domp Truk is a great project for you!

I printed my model using the default Prusament PLA settings for a MK3S with 0.30mm layer height. NO SUPPORTS REQUIRED! I do recommend adding a brim to the Axle.stl file so that it does not fall over during the print. DO NOT ADD SUPPORTS FOR THE THREADS.

The two Bed.stl files will need to be printed diagonally across the bed to fit on the MK3 bed (see the PrusaSlicer screenshot in the images).

THIS PROJECT IS TOO LARGE FOR THE PRUSA MINI! If you have a Prusa Mini, you can try printing this at 75% scale. However, I cannot guarantee that everything will work as the tolerances will change when you change the scale.

The filament that I used was Prusament Galaxy Black PLA and Atomic Filament Perfect Yellow PLA (both printed with the PLA Prusament settings).

If you like this project, please support me by subscribing to my YouTube channel! I don't charge for these files, so this is my only ask (and it's FREE to subscribe)!

https://youtu.be/khZksTtMxtY

Connect With Us

YouTube: https://www.youtube.com/@3dsourcerer
Website:  https://3dsourcerer.com/
Facebook: https://www.facebook.com/3DSourcerer/
TikTok: https://www.tiktok.com/@3dsourcerer
Instagram: https://www.instagram.com/3dsourcerer
Twitter: https://twitter.com/3DSourceNews 
LinkedIn: https://www.linkedin.com/showcase/3d-sourcerer 


Filament Hanger by 3D Sourcerer

Rebel X-Wing Pilot Helmet Stencil for the sides

Cylinder Pencil Holder with Diamond Texture

A Cylinder Pencil Holder with a diamond texture. A desk organizer with a modern appeal. 

Print time: 5 - 7 hours at 100% scale (depending on settings)
Dimensions: 6.9 x 9 cm (diameter x height)

Tip: make sure your retraction settings are properly calibrated to be sure you can print a small calibration tower test. 

If you have questions, please send me a message.

Happy printing

3D printer settings

0.2 - 0.25mm layer height
10% infill + 5-6 bottom layers
30 - 40 mm/sec print speed

Filament Stopper

Filament Stopper.step

Desk fan for 24.5 mm DC motor 

fan motor housing.stl

business services

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

0% INFILL!! - Marker Holder - Marker Stand

8.9" LCD Enclosure for Handheld PC

Creality Water Cooler Fan Support and Duct

Creality Spider Speedy hotend

View 25 new models

MagneFlex Prusa Isolation Feet - Gen1

View 13 new models

TBS Source One V5 Vifly Finder 2 Buzzer Front Mount

Raspberry Pi Display Monitor 7" Screen Box RPi Enclosure Case

Magazine Rack or Holder

Voxel PLA Spool Tower

Funky SD/microSD Card Tree

View 10 new models

Reinforced Spiralized Gridfinity Bin

Domp Truk - 3D Printable Not-A-Tonka Truck

View 30 new models

Rebel X-Wing Pilot Helmet Stencil for the sides

Cylinder Pencil Holder with Diamond Texture

Filament Stopper

Desk fan for 24.5 mm DC motor