Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6067888.

im sorry world for what i have done

i used StarbugProps/Bozzy1979 helmet and combined it with michaudtime Yondu Fin

Helmet: https://www.thingiverse.com/thing:5908910
Fin: https://www.thingiverse.com/thing:2408408

Yondalorian Helmet

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6003226.

make sure to scale it for your purposes

Spaceballs - Desk Organizer 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6003197.

whenever you feel bad, that you werent productive today, remeber that i spend multiple hours doing this

Spaceballs - Mr. Coffee and Mr. Radar

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5999158.

i wanted to participate in a contest so i made this

Spaceballs - The Gamecartridge Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5975489.

so thats pretty self explainatory


Rebel X-Wing Pilot Helmet Stencil for the sides

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5945149.

i needed that so i did it in tinkercad

Boba Fett Helmet Interior (Compatibale with Galactic Armory Helmet)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5938934.

i liked the newer design, so i made this stl and kind of a bracelet, i dont know what to call it, so sorry for poor english

Modern Mythosaur 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5917751.

i used 7 of the steps and 3 stairs, i glued them in place

Minifig Platform compatible with Lego

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5886253.

my cousin sent me a picture of a happy bread he wanted me to print for him, so i had to make this. 

where is it from? i dont know
why is the bread happy? i dont know 
is it toasted? i dont know 

he wanted bread, he got bread

happy little bread 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5844738.

i needed this sword as one piece for another project

has nothing to do with the anime one piece im sorry i couldnt think of another way to name it

this is NOT the full size, i had to shrink it down a bit to work with it

One Piece Master Sword Legend Of Zelda

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5844753.

i did this because it looked cool on the photo. i used tinkercad and nomad sculpt, im not good at it. if you have some kind of skill and think you can do it better: you can do it better, please for the love of god anyone make a better version i dont know anything about zelda and his green hat, this is suppsoed to be a present

i know the guy with the green hat is link, but i like saying it like this

Master Sword Broken Legend Of Zelda

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5749146.

So my girlfried always loses her Omnipod Dash device and i was really tired of getting off the couch so she could look for it. You can't imagine how much this little act annoyed the hell out of me. i needed to do something about it. Hence this Thing.
She got an AirTag for Christmas and i knew what to do. 
With a bit of measuring and testing i got this working. The "medical device" and the cross was her idea, i personally do not like it as much. If for whatever reason anyone in the right mind, would like a case without the AirTag i created with my poor Tinkercad skills, i also put this in here. The screw case for the AirTag was from Thingiverse and i planned on putting a link here or even make this a remix. Problem is i couldnt find it for the life of me. Just gone. So thanks to whoever created it, im sorry i cant credit you!

Omnipod Dash AirTag Case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5777015.

I liked the idea and found nothing alike on thingiverse. so i made this

EDIT: Some people are having issues with the cartridges falling out. i dont know why it works for some people and some dont. To avoid issues i added two test files. One is the normal size i used and one i made narrower so it wouldnt be loose. Maybe test it with them first, so you dont waste filament or time

I made this Video about it 
https://www.instagram.com/reel/CnNL-ZNDIAY/?igshid=MDJmNzVkMjY=

Pokédex Game Cartridge Holder for Nintendo Switch READ DESCRIPTION PLEASE

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5446962.

didnt find this kind of shield anywhere as an stl file. sad. had to do it myself, im a beginner so i did it in thingiverse. if you think i couldve done better: you`re probably right!

Captain Americas Shield from Mavel's Avengers Game

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5500654.

i remixed it to kinda look like the r25 steering wheel, its my favorite f1 car. i used tinkercad, so im sorry if you think its badly made, i tried my best. I will improve on it, maybe do the big dial in the middle and improve the overall shape, but this works for now. i made a video of it, if you want to see it click here https://www.instagram.com/reel/CiSjTCPjVKg/?igshid=MDJmNzVkMjY%3D

Renault R25 Wheel Add-On for Logitech G29

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5834340.

felt like this was a funny idea

i used fake plants from ikea and the tire from another car i found on thingiverse. it was a 2018 Ferrari but i cant find it anymore, maybe its deleted idk. if anyone finds it i gladly add the link for a remix

i made a video about this https://www.instagram.com/reel/CiVZVhuD0mr/?igshid=MDJmNzVkMjY=

F1 Tire Plant Pot

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4771012.

My BL Touch cable was too high and the normal Ender 3 Cover pushed it down too much, it didnt work after it was closed. So i made this. if you want to install the fan you have to drill holes.

Cover for Ender 3 Sidebox

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5376488.

I designed this cause i didn't have any space left on my helmet shelve. So i looked across my room and then i see this big a$$ wall.. other people would say: opportunity. Problem with that wall is, that i can't really drill a hole there. Like a normal power drill ain't doing sh!t against this stone wall. I could use a big a$$ stone drill, but the wall is so thin i'd be drilling a gl0ry h0le to my neighbors. So my task was clear. Create a mount that'll stick to the wall without drilling. I had multiple options: super glue, duct tape, hot glue, staples and UHU patafix™.

Super glue - sticky fingers, sticky wall, stinky girlfriend - so thats a no
Duct tape - could be functional, but might not work out as its not so aesthetically pleasing
Hot glue - you've clicked on this thing so you know thats my holy glue and the one i ended up chosing
Staples - no, why did you even read this
UHU patafix™ - this chewing gum with an attitude can't hold shit.. like pictures fall off my wall.. my girlfriend still insists on buying them so im loosly stuck to them

Now we know the envoirement, the tool and the goal. We don't know why R2-D2 chose to be awoken exactly at the end of the seventh Star Wars movie (probably some force bs)... but we know what we have to do now.

Since i'm in love with hot glue from the day i knew about it existing, i've tested my fair share of sticking shit to the wall with it. What can i say? F-cking hotgluemasterrace. Like everything sticks instantly and if you don't want it there, you can just heat it up a little with a hairdrying and peel it of. Unlike UHU patafix™ which always leaves a residue.

If we want the hot glue to hold an considered amount of weight we need a lot of it. A lot of area on the print to be glued to the wall should do the trick. You the the three big ass triangles with a bit of support structure? Just pour hot glue on that and stick it to the wall.

For the helmet mount part i've just looked up other mounts to see how they did it. I choose one, with a long stick and half a ball at the end. This... svcked. It just didnt work out. I got rid of most of it, except for the triangle support that held the stick. Now i redesigned it to be like a clamp. The helmet slide in and can just be picked up again if you need them. Dind't work though..

After a few failed attemps i now settled on the "all in one" solution. Maybe i add a version later with diffrent distances to the wall. Wouldn't wait for it though, as i probably forget about it as soon as i publish this. 

I've printed it with the named print settings and glued it to my wall. And holy guacamole this is some strong sh!t.. i mean i'm a really heavy person and could.. pull it down a bit without it coming off. As we people in the industry say: that'll hold up.

What else is there to say? Print it if you like to, how you like to, when you like to, where you like to, in whichever color you want and with whatever material your printer feels comfortable.. i really couldn't care less.

More pictures will follow.

Thats it, please stop reading.

..

hahah you go now you little rebel

.

.

.

burp ... OHH uhh you're still here hmm

umm

why do deep divers always exit the boat backwards?

.

.
If they do it forward they'll land in the boat!

ok haha now leave please

.

.

.

. this thing was definitly not sponsored by UHU patafix™


hot glue helmet mount for a wall

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5820200.

so wanted to print the "Gear Shift Keychain
by CASTALIA" but sadly it wasnt a real model, just a link to a cults model that wouldve cost me 5€. since this was a scam for me i thought i just try and do it myself, upload it here so you guys have a free version of it. is it better? no probably way worse, but its free! i printed it and it works, just not in the mood to take a picture. 

print either the normal or the keychain base, i couldnt care less.

also: dont upload things on thingiverse if its just a link to another website where you have to pay for it

I had to edit it a bit because of a false copyright claim i got. I added a picture showing my completly original design. As you can see the internal mechanism is completley diffrent from other models.

Free Gear Shift Keychain (Inspired by others, but Original Design!) 

Free Gear Shift Keychain Clone

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5749156.

i used some referece pictures i found online to make an svg and then an stl, hope it helps you as much as it helped me

Phase 2 Clone Trooper Visor Cutout

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5834347.

i used the same tire model i used for my f1 plant potfrom. its from another car i found on thingiverse. it was a 2018 Ferrari but i cant find it anymore, maybe its deleted idk. if anyone finds it i gladly add the link for a remix

i made a video about it https://www.instagram.com/reel/ChCa2sVj-Cj/?igshid=MDJmNzVkMjY=


F1 Tire Ender 3 LCD Knob

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5379930.

My inpsiration was simone gierz's ring so check that out too https://yetch.store/products/screwdriver-ring

Ring with bit holder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

radiusmcfly