Gridfinity | Tiered Bins

Gridfinity_tiered_1x1_sm.stl

Gridfinity Toolbox (Parametric)

Plate.stl

Hextraction Beta Boards! A Hackable Tabletop Game from the Gridfinity guy!

One Measly Slot.stl

Gridfinity Adjustable Jumper Wire Comb

Adjustable Jumper Rack Comb.stl

Gridfinity Blank Blocks

1x1 Block 1.25in.stl

Gridfinity 2x2 Three-Bay Nipper, Stripper, Plier Rack

At the risk of having my nerd card revoked, I'll admit that I just don't need space for 6 nippers, strippers, and/or pliers. 

Rather than waste space with unused bins, I chopped Zack's original file down into this 2x2 Three-Bay Rack!

#Gridfinity

USB Cable Storage Organizers (SMALL)

USB_Cable_Storage_75mm.stl

Gridfinity 3x1x2 Hex Bit Holder x46.stl

**Hex Bit Holder** for the Gridfinity System this 3x1 module holds 46 hex bits

**Please visit my Youtube Channel **[https://www.youtube.com/c/DIYTINKERER](https://www.youtube.com/c/DIYTINKERER)

[https://www.youtube.com/c/ZackFreedman](https://www.youtube.com/c/ZackFreedman)

Gridfinity system originally designed and made open source by** Zack Freedman **

Parametric Gridfinity Small Parts Containment Tray 

gridfinity_small_parts_containment.stl

#gridfinity Vase Mode Single Box

Vase Mode Single Cell.stl

Gridfinity 5 unit tall bins for Husky drawers

Gridfinity 3x3x5.obj

USB Cable organizer storage bin - Gridfinity

Cable storage bin with 10 18mm wide compartments, to fit various size USB or other cables. Fits USB cables up to 10ft length depending on diameter. Base is Gridfinity compatible 42mm squares (2x4), but top is not stackable.

Took about 12hrs to print in PLA on an Ender 5. No supports needed.

Gridfinity 3x5 Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v)

Designed to interface with Zack Freedman's #Gridfinity system. Dedicated spots for bulk AA, bulk AAA, AAAA, 2032 (CMOS battery), A97/LR44/Other (Calipers, etc.), 18650 and 9-volt batteries. Prints well with 0.4 or 0.6 nozzle. 

Supports not necessary unless you're using the magnet holes in the bottom, in which case you'll want supports on "touching buildplate" mode. Tolerances are tight at ~0.5 mm due to the sizes of the batteries and needing to stick to 3-unit-wide model, but this should be achievable with pretty much any printer. For best printing, only adjust horizontal expansion if necessary to fit the batteries since the walls are all modeled to multiples of 0.4mm. Changing horizontal expansion will likely increase print time and reduce quality.

Gridfinity IKEA ALEX Drawer Split 7x12 Frame for 220x220 Buildplates

Gridfinity_Alex_All.stl

#Gridfinity UPDATED 5/20/22! Hex Baskets

This item is for use with the #GridFinity system by Zach Freedman:

[https://www.youtube.com/watch?v=ra_9zU-mnl8](url)

 A 2 wide by 2 deep by 2 unit high basket with a hex mesh grid. I use this to store about 25 misc pens on a weighted base plate. 

Contrary to Zach's instructions, I've been printing all my modules with a 0.8 nozzle, which seems to work just fine. The basket was printed with silver PLA at 75mm speed on an ender 3 pro with 0.8 nozzle and 0.32 layer height without support. The basket is slightly spongy and flexible.

#Gridfinity 2x2x2 Hex Basket

#Gridfinity Wire Spool Holder

This item is for use with the #GridFinity system by Zach Freedman:

[https://www.youtube.com/watch?v=ra_9zU-mnl8](url)

This is a 4 unit wide by 1 unit deep by 1/4 unit high hook up wire spool holder. This is compatible with common wire hookup kits such as: [https://www.amazon.ca/CBAZYTM-Stranded-Gauge-Colors-Electrical/dp/B075M8DGYX/](url)

It will work with most common spool sizes, and uses a 6mm rod (as supplied with most kits). There are 6 threading holes at the front.

Contrary to Zach's instructions, I've been printing all my modules with a 0.8 nozzle, which seems to work just fine. The basket was printed with silver PLA at 75mm speed on an ender 3 pro with 0.8 nozzle and 0.32 layer height without support.

Gridfinity Pinecil + TS100 Tips and Tool Holder

Pinecil Tips w Magnet.stl

Gridfinity 1x1 USB Device Holder for 10 Small devices

Gridfinity.1x1.USB.Device.Holder.10.Small.step

Gridfinity 1x1x1 Hex bit holder x14.stl

**This is a 1x1 Gridfinity module for 14 Hex bits**

Gridfinity system by** Zach Freedman**

please visit my Youtube Channel [https://www.youtube.com/c/DIYTINKERER](https://www.youtube.com/c/DIYTINKERER) :-)


#Gridfinity Usb and SD Card Holder 

This item is for use with the #GridFinity system by Zach Freedman:

[https://www.youtube.com/watch?v=ra_9zU-mnl8](url)

 A 1 wide by 2 deep by 1/2 unit high USB thumb drive and SD card holder on a weighted base plate. 
 
Contrary to Zach's instructions, I've been printing all my modules with a 0.8 nozzle, which seems to work just fine. This item was printed with silver PLA at 75mm speed on an ender 3 pro with 0.8 nozzle and 0.32 layer height without support. The holder has slots for 4 USB Devices, 6 Standard SD cards and 6 Micro SD cards. The Standard slots are capable of holding 2 Memory Stick Duo's for all you PSP fans and even xD cards for you retro Fujifilm camera users. Tolerances are loose to allow the model to be printed easier on poorly configured printers that over extrude.

GridFinity

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gridfinity | Tiered Bins

Gridfinity Toolbox (Parametric)

Hextraction Beta Boards! A Hackable Tabletop Game from the Gridfinity guy!

Gridfinity Adjustable Jumper Wire Comb

Gridfinity Blank Blocks

Gridfinity 2x2 Three-Bay Nipper, Stripper, Plier Rack

USB Cable Storage Organizers (SMALL)

Gridfinity 3x1x2 Hex Bit Holder x46.stl

Parametric Gridfinity Small Parts Containment Tray

#gridfinity Vase Mode Single Box

Gridfinity 5 unit tall bins for Husky drawers

USB Cable organizer storage bin - Gridfinity

Gridfinity 3x5 Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v)

Gridfinity IKEA ALEX Drawer Split 7x12 Frame for 220x220 Buildplates

#Gridfinity UPDATED 5/20/22! Hex Baskets

#Gridfinity Wire Spool Holder

Gridfinity Pinecil + TS100 Tips and Tool Holder

Gridfinity 1x1 USB Device Holder for 10 Small devices

Gridfinity 1x1x1 Hex bit holder x14.stl

#Gridfinity Usb and SD Card Holder