**Update 04/06/22** (June not April ;-) )
Now that Fusion share link is working again you can now play with the source.
[https://a360.co/3x9cxGR](https://a360.co/3x9cxGR)

There are a couple of parameters you can play with:
_slotHeight_ - The total height of the box, set at the default 42mm.
_slotsHigh_ - A multiple for the slotHeight. This has a minimum of 1/3 (one third) of the slotHeight. Below that the label shelf goes wonky and you start losing area of the footprint.

**NOTE** The final 2 operations are extrusions. Supress/Unsupress these as you like to enable or disable the split and label shelf. They have been named to suit.

**Updated to V2**
Gridifnity compatible vase mode single cell boxes.

Yes, they stack
Yes, you can put stuff in 'em
Yes, you can have a spot for a label
Yes, you can have it split into 2 compartments.
Yes, they print wicked fast.
Yes, they are awesome in clear filament.

No, they're not compatible with magnets
No, they can't be more than 1 cell
No, you can't mess with the usual parameters on the stock gridfinity models, Standard size only.

Print with 2 or 3 bottom layers. 0.4 - 0.6 nozzle but limit the extrusion width to a max of 0.6. Don't go crazy on the layer height, the overhangs will bite (0.2-0.25 should be fine) Clear material looks great. PETG is pictured.

Thangs seems to cut off the filenames so they are:

- Vase mode single cell
- Vase mode single cell with label
- Vase mode split single cell
- Vase mode split single cell with label

#gridfinity Vase Mode Single Box

Vase Mode Single Cell.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

LittleHobbyShop

#gridfinity Vase Mode Single Box