Jurassic Print Keychains

Manfrotto 357PLV-1 Sliding Plate // Tripod Mounting Plate

Simple Plate.stl

Axolotl Model

Hoop Glider

Flexi Articulated Moth

Gameboy DMG-01 Display Stand

uAvionix Sentry RAM Mount

I wanted a RAM mount adapter to use my uAvionix (ForeFlight) Sentry Plus ADS-B device on my powered parachute. It is compatible with the 1-inch ball-mount series from RAM Mounts.

Requires a 1-inch 1/4-20 machine screw for mounting. Recommend stainless steel.

Designed with "ears" similar to the stock mount, but with additional holes to tie a safety lanyard in case the print fails.

Printed in Siraya Tech Blu Nylon Black Resin at 50-micron layer height on an Anycubic Mono X resin printer.

BMW E46 Cupholder + Hydroflask

CupHolder 1.2.SLDPRT

Sony PSP

Garage Remote Holder

Filament scrap reel

DCDC Step-Down Converter Mini Case(MP1584)

MP1584_Case-1.stl

Creality CR6-SE Filament Guide - Supports.stl

Filament guide designed for the Creality CR6-SE that fits on top of the filament sensor.

Designed with the guide pointing down, which unfortunately means it needs to be printed with supports.

Weirs Beach Sign (HO Scale?)

Stackable StorageDrawers

Vase mode gear tool holder

An 8 tooth involute gear shaped tool caddy for printing in vase/spiralize mode.

This might look like just a really thick solid spur gear, but on closer examination of the top you'll see it has lots of thin slots that result in a continuous outer wall that snakes in and out of the model. When printed in vase mode, the outside of the walls adjacent to each other along the slots fuse together (see close up picture) and reveal 13 compartments. 5 larger ones in the hub and 8 smaller tooth compartments.

Dimensions:
- diameter: 150mm
- height: 100mm
- base: 0.6mm thick before the slots start

Compartments
- center: 1x 38mm round
- outer hub: 4x roughly 30mm x 60mm
- teeth: 8x about 20mm around (perfect for plier handles and long thin tools)

Printing:
- Use vase/spiralize mode with typical settings.
- **IMPORTANT**: Make sure you have enough bottom layers (3 @ 0.2mm layer height) to make up the base and preview your slicing to check that the wall starts on top of the last base layer. *More* base layers won't hurt.

Computers & Electronics

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Jurassic Print Keychains

Manfrotto 357PLV-1 Sliding Plate // Tripod Mounting Plate

Axolotl Model

Hoop Glider

Flexi Articulated Moth

Gameboy DMG-01 Display Stand

uAvionix Sentry RAM Mount

BMW E46 Cupholder + Hydroflask

Sony PSP

Garage Remote Holder

Filament scrap reel

DCDC Step-Down Converter Mini Case(MP1584)

Creality CR6-SE Filament Guide - Supports.stl

Weirs Beach Sign (HO Scale?)

Stackable StorageDrawers

Vase mode gear tool holder

Garmin Mount Apple Watch Ultra.stl

Gameboy Style Switch Game Holder

Nintendo Switch Game Shelf Update!

Spool Holder_SUNLU