3D Printing Filament Clip

Works with both 1.75mm and 2.85 diameter filaments. Tested in PLA and PETG with default settings in Prusa Slicer, no issues.

Cable Clips

Cable Clip 44mm.step

IKEA Kallax-Kvissle Clip

ikea-kallax-kvissle-clip.step

Leave on Clip Tag - Based on Grandma's Favorite Filament Clip

Clip Tag PLA.3mf

Fleximounts D1D Monitor Mount - Cable Clip (Tube)

Fleximount D1D Cable Clip.stl

Infinity clip

infinity_clip.stl

A clip

a_clip.stl

Fluffy Beard // Lil'Hats'N'Stuff

Fluffy Beard.stl

Side Tank Clip fits GE Opal 2.0 Ice Maker

Opal2SideTankClip.3mf

Parametric Hanging Clip

hanging_clip_20x20_1mm.stl

Quansheng UV K5 Gürtelclip Adapter

Quansheng Backplate Step

Henry Hoover Hose Accessory Collection

blank clip.step

EZPZ Pegboard Hook // 20mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 25mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Bowden Tube Holder for K1

This is a press fit bowden tube holder for the Creality K1. If you connect a dry box or just want to guide the filament using a bowden tube, this will hold the tube in place.

Tolerances are important for it to press fit into the honeycomb.

Note - Print it vertical for maximum strength. No supports needed for printing but if you feel just add a brim for adhesion.

GripperHook

GH_hook.stl

M.2 NVMe SSD heatsink clip

m.2 heatsink clip 3mm.3mf

Clip-on handles for miniature storage box | 1:12 scale dollhouse furniture

Clip-on handles compatible with this storage box that is inspired by the IKEA SMÅSTAD. These models are 1:12 scale pieces of dollhouse furniture that work for general storage needs.

Miniature clip-on handles for miniature storage box | 1:12 scale dollhouse furniture

Park Tool AWS-10 belt clip/holder

Keep your tools close at hand with this belt clip/holder For Park Tools AWSS-10 hex wrench set - also knowns as the best hex wrench set known to man.

Simply slide it onto your belt, pocket or other piece of clothing, slide the tool down and it's alwayss close without taking up space in your pocket or you putting grease in them.

To release the tool simply slide it upwards or to either side. Secure enough for running and jumping in the workshop - perfect for the stressful life of a home or workshop bike mechanic. 

Clip

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

3D Printing Filament Clip

Cable Clips

IKEA Kallax-Kvissle Clip

Leave on Clip Tag - Based on Grandma's Favorite Filament Clip

Fleximounts D1D Monitor Mount - Cable Clip (Tube)

Infinity clip

A clip

View 10 new models

Side Tank Clip fits GE Opal 2.0 Ice Maker

Parametric Hanging Clip

Quansheng UV K5 Gürtelclip Adapter

View 24 new models

EZPZ Pegboard Hook // 20mm Hook Type B

EZPZ Pegboard Hook // 10mm Hook Type B

View 17 new models

Bowden Tube Holder for K1

GripperHook

M.2 NVMe SSD heatsink clip

Clip-on handles for miniature storage box | 1:12 scale dollhouse furniture

Park Tool AWS-10 belt clip/holder