Multiboard Cable Clip

Multiboard_Cable_Clip_MidThread.stl

Infinity clip

infinity_clip.stl

Chip Bag Clip

Chip Bag Clip S.stl

BLOOM CLIPS | MAGNETIC FLOWER WITH PETAL CLIPS

BLOOM CLIPS - CLIP - 2.STL

Mini mushroom bookmarks, keychains and decoration

Morel_key_chain.stl

Print-in-Place Bag Clip

Mola 100mm v10.stl

Circular Fastener (Hose Clamp)

Multiboard Pushfit Single Knife Clip

Multiboard Pushfit Single Knife Clip.stl

Tickler SA-6 — Fully 3D-printable semi-automatic airsoft pistol

Housing Right.stl

Ultimate Bag Clip (with Lid - easy access!)

Clip 50 - XS.stl

Paperclip Bookmark/Paper Clip

Paperclip_Medium.stl

EZPZ Pegboard Hook // 25mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

J1772 EV Charger Cable & Plug Holder

J1772 Holder V1.11.stl

EZPZ Pegboard Hook // 20mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Keyring Oval 1.5" x 0.75" // Keychain Ring

Keyring Oval.stl

Multiboard Pegboard Clip

Multiboard Pegboard Clip.stl

Ultimate Bag Clip

Ultimate Bag Clip 1.stl

Fishbone Bookmark/Paperclip

Fishclip_Thick.stl

Lawnmower Bail Lever Grip Clip

Lawnmower_Clip.stl

EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Clip

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Multiboard Cable Clip

Infinity clip

Chip Bag Clip

BLOOM CLIPS | MAGNETIC FLOWER WITH PETAL CLIPS

Mini mushroom bookmarks, keychains and decoration

Print-in-Place Bag Clip

Circular Fastener (Hose Clamp)

Multiboard Pushfit Single Knife Clip

Tickler SA-6 — Fully 3D-printable semi-automatic airsoft pistol

Ultimate Bag Clip (with Lid - easy access!)

Paperclip Bookmark/Paper Clip

EZPZ Pegboard Hook // 25mm Reinforced Hook

J1772 EV Charger Cable & Plug Holder

EZPZ Pegboard Hook // 20mm Hook Type B

EZPZ Keyring Oval 1.5" x 0.75" // Keychain Ring

Multiboard Pegboard Clip

Ultimate Bag Clip

Fishbone Bookmark/Paperclip

Lawnmower Bail Lever Grip Clip

EZPZ Pegboard Hook // 10mm Hook Type B