CardDock for MTG Cards (Version TA) - Auto-aligning Card Deck Holder and Case
This version of CardDock is for MTG cards but please note I have created various MTG card versions based on user requests and testing. Please note the size of this version and compare it to your needs and other MTG CardDocks listed here...
This model: MTG (Version TA): 2.7 in. (69 mm) by 3.65 in. (93 mm) about 100 cards in sleeves
Other models available: MTG (Version XA): 3.5 in. (89 mm) by 5. in. (127 mm), about 111 cards MTG (Version XB): 3.35 in. (85 mm) by 4.84 in. (123 mm) about 100 cards MTG (Version XD): 2.6 in. (66 mm) wide by 3.58 in. (91 mm) long and 40 cards stacking to a height of about 1.18 in. (30 mm) high MTG (Version XE): 2.6 in. (66 mm) wide by 3.58 in. (91 mm) long and 60 cards stacking to a height of about 1.77 in. (45 mm) high
CardDock is a novel card cradle that automatically aligns the cards once they are dropped on the CardDock. The CardDock is also a card case so you have somewhere to keep your deck of cards safe when not in use. A selection of external hard cases are included to protect the CardDock and Cards for safekeeping.
The lid can be snapped onto the underside of the CareDock to lift the CardDock up.
100% printed - no hardware, fasteners, or adhesives required. No support is required.
See included image for Print Settings
Related Links
Standard playing cards, single deck Standard playing cards, double deck Bridge cards, double deck UNO cards, 112 count Pokemon and similar cards, 60 count
Visit my blog for more information and other designs: https://www.logicalplanet.com/
Revisions and Updates I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.
CardDock for MTG Cards (Version TA) - Auto-aligning Card Deck Holder and Case
Logical Modular Planters
CollarPod 40 - Poop Bag Holder for Dog Collars - 1.5 Inch Collar - Single Piece TPU - No Assembly
CollarPod 26 - Poop Bag Holder for Dog Collars - 1 Inch Collar - Single Piece TPU - No Assembly
CollarPod 17 - Poop Bag Holder for Dog Collars - 5/8 Inch Collar - Single Piece TPU - No Assembly
BeltPod 40 - Poop Bag Holder for Your Belt - Single Piece TPU - No Assembly
Logical Scraper B - 1 Piece No Screws No Assembly
Logical Scraper A — 2 Piece, No Screws
LGP Self-Watering Tray — Modular Bottom Watering Reservoir for the Logical Grow Platform
LGP Single Cell ThirdTray — Modular Grow Cell for the Logical Grow Platform
LGP Single Cell HalfTray — Modular Grow Cell for the Logical Grow Platform
LGP 2×3 Cells XL HalfTray — Modular Seed Starting Tray for the Logical Grow Platform
LPE25 Clampless Quick Connect
H2 Series Waste Bin
Exhaust Header for Bambu Lab H2 Series Printers
Lazy Susan 120 v3.0
Lazy Susan 160 v3.0
Lazy Susan 200 v3.0
Lazy Susan 240 v3.0
Lazy Susan 280 v3.0
Would it be possible to make this 66mm x 91mm and 40-60 MTG sleeved cards instead of 100?
I would also like this thanks!
I should say the sleeved cards are 66mm x 91mm
can you email me at logicalplanet3d gmail.com and I will send you a prototype to test.
Email sent!
Does anyone else have a these models be way taller than indicated in the description? I Fell like I'm doing something wrong because the 100 card model is 76mm not 69mm and similar with other models
If you tell me what size you want, I can check if I have it already or make it for you. Please email me at logicalplanet3d gmail.com
I had to cut chamfers on the lid where the sides slot into it. You cannot see the blocking part of the lid in the pics as they show only the smaller versions of the design. Maxbe you can double check and fix this. Besides from that it's a great design, thank you for sharing!
note: I try to integrate some kind of hinge and locking mechanism to one of the ends, so that I can flip it down for playing making the deck more accessable for drawing and locking the hinge for storing.
this is such a cool design and super easy to print and assemble :) Attaching the cover is a bit finnicky when the height is this tall, but hey that's the price for having a 100 card deck! Thanks for sharing this design for free.
You are welcome and thanks for the feedback. And, yes the tall one like this are not perfect but still fun.
What a fun and functional design. Thank you!
These dimensions work well for double-sleeved commander decks. I had to reduce the z-axis height to 60mm on the cradle parts and the y-axis to around 70mm for the outer shell. After those tweaks, it works pretty well! A single-sleeved commander decks fits snugly, with no sideboard or extra room.
need an option to do custom scaling. this one is slightly too wide, and need an option for 60 cards sleeved
Hi, unfortunately, I do not have the skills for that... yet. One day. Plus I have found a lot of customization is needed as I change the dimensions.