This version of CardDock is for MTG cards but please note I have created various MTG card versions based on user requests and testing. Please note the size of this version and compare it to your needs and other MTG CardDocks listed here...

This model: MTG (Version XB): 3.35 in. (85 mm) by 4.84 in. (123 mm) about 100 cards

Other models available: MTG (Version TA): 2.7 in. (69 mm) by 3.65 in. (93 mm) about 100 cards in sleeves (this model) MTG (Version XA): 3.5 in. (89 mm) by 5. in. (127 mm), about 111 cards MTG (Version XD): 2.6 in. (66 mm) wide by 3.58 in. (91 mm) long and 40 cards stacking to a height of about 1.18 in. (30 mm) high MTG (Version XE): 2.6 in. (66 mm) wide by 3.58 in. (91 mm) long and 60 cards stacking to a height of about 1.77 in. (45 mm) high

CardDock is a novel card cradle that automatically aligns the cards once they are dropped on the CardDock. The CardDock is also a card case so you have somewhere to keep your deck of cards safe when not in use. A selection of external hard cases are included to protect the CardDock and Cards for safekeeping.

The lid can be snapped onto the underside of the CareDock to lift the CardDock up.

100% printed - no hardware, fasteners, or adhesives required. No support is required.

See included image for Print Settings

Related Links

Standard playing cards, single deck Standard playing cards, double deck Bridge cards, double deck UNO cards, 112 count Pokemon and similar cards, 60 count

Visit my blog for more information and other designs: https://www.logicalplanet.com/

Revisions and Updates I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.