This version of CardDock is designed for a 60-card deck of standard-size playing cards and Pokemon cards. CardDock is a unique card cradle that automatically aligns the cards once they are dropped on it. The CardDock is also a card case so you have somewhere to keep your deck of cards safe when not in use. A selection of external hard cases are included to protect the CardDock and Cards for safekeeping.

The lid can be snapped onto the underside of the CareDock to lift the CardDock up off the playing surface away from spilled drinks and dirt.

This CardDock is made for Pokémon TCG (same as standard cards but 60 to a deck) approximately 2.5 in. (64 mm) wide by 3.5 in. (89 mm) long and 60 cards stacking to a height of about 0.72 in. (19 mm) high.

I also have made CardDock for various MTG sizes: MTG (Version XA): 3.5 in. (89 mm) by 5. in. (127 mm), about 111 cards MTG (Version XB): 3.35 in. (85 mm) by 4.84 in. (123 mm) about 100 cards MTG (Version TA): 2.7 in. (69 mm) by 3.65 in. (93 mm) about 100 cards in sleeves

100% printed - no hardware, fasteners, or adhesives required. No support is required.

See included image for Print Settings

Related Links

Standard playing cards, single deck; https://than.gs/m/1326834

Standard playing cards, double deck; https://than.gs/m/1332115

Bridge cards, single deck; https://than.gs/m/1333758

Bridge cards, double deck; https://than.gs/m/1333752

UNO cards, 112 count; https://than.gs/m/1332775

Crib Boards

Standard Size Folding Board https://than.gs/m/1165557

Extra Large Folding Board https://than.gs/m/1326829

Marathon (100 game) Board https://than.gs/m/1326832

Visit my blog for more information and other designs: https://www.logicalplanet.com/

Revisions and Updates I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.