CardDock Double Deck - Auto-aligning Card Double Deck Holder and Case
This is the double-deck version of my original CardDock. It is a unique card cradle that automatically aligns the cards once they are dropped on the CardDock. The CardDock is also a card case so you have somewhere to keep your deck of cards safe when not in use. A selection of external hard cases are included to protect the CardDock and Cards for safekeeping.
The lid can be snapped onto the underside of the CareDock to lift the CardDock up off the playing surface away from spilled drinks and dirt.
This CardDock is made for Standard playing cards (poker/casino) (double deck) approximately 2.5 in. (64 mm) wide by 3.5 in. (89 mm) long and 104 cards stacking to a height of about 1.25 in. (32 mm) high.
100% printed - no hardware, fasteners, or adhesives required. No support is required.
See included image for Print Settings
Related Links
Standard playing cards, single deck; https://than.gs/m/1326834
Bridge cards, single deck; https://than.gs/m/1333758
Bridge cards, double deck; https://than.gs/m/1333752
UNO cards, 112 count; https://than.gs/m/1332775
Pokemon and similar cards, 60 count; https://than.gs/m/1333423
Crib Boards
Standard Size Folding Board https://than.gs/m/1165557
Extra Large Folding Board https://than.gs/m/1326829
Marathon (100 game) Board https://than.gs/m/1326832
Visit my blog for more information and other designs: https://www.logicalplanet.com/
Revisions and Updates I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.
2025-05-11: I have revised the tilting Side and End parts to make them lighter. The original posted parts had more material which meant more cards were needed to activate the CardDock. Now fewer cards are needed. I have also revised the TPU Bumpers and Covers so that they will stack a little bit. They do not interlock but rather gently nest so that if you have multiple sets you can stack them and hopefully they will stay in place.
CardDock Double Deck - Auto-aligning Card Double Deck Holder and Case
Logical Modular Planters
CollarPod 40 - Poop Bag Holder for Dog Collars - 1.5 Inch Collar - Single Piece TPU - No Assembly
CollarPod 26 - Poop Bag Holder for Dog Collars - 1 Inch Collar - Single Piece TPU - No Assembly
CollarPod 17 - Poop Bag Holder for Dog Collars - 5/8 Inch Collar - Single Piece TPU - No Assembly
BeltPod 40 - Poop Bag Holder for Your Belt - Single Piece TPU - No Assembly
Logical Scraper B - 1 Piece No Screws No Assembly
Logical Scraper A — 2 Piece, No Screws
LGP Self-Watering Tray — Modular Bottom Watering Reservoir for the Logical Grow Platform
LGP Single Cell ThirdTray — Modular Grow Cell for the Logical Grow Platform
LGP Single Cell HalfTray — Modular Grow Cell for the Logical Grow Platform
LGP 2×3 Cells XL HalfTray — Modular Seed Starting Tray for the Logical Grow Platform
LPE25 Clampless Quick Connect
H2 Series Waste Bin
Exhaust Header for Bambu Lab H2 Series Printers
Lazy Susan 120 v3.0
Lazy Susan 160 v3.0
Lazy Susan 200 v3.0
Lazy Susan 240 v3.0
Lazy Susan 280 v3.0
This worked great for two decks of cards. Since it's a game we like to bring to breweries and the like we sleeved the cards. This makes the cards too big and too thick for this specific model's dimensions. I have the new measurements needed if you could make a new model please?
Yes, send me the dimensions, but did you look? I have already posted many other sizes, including for sleeved cards.
Thank you for offering, The MTG - version TA is really close to what I need. It's slightly wider and it higher (this is good). I'm going to give it a go first before I send over new dimensions.
I have need of one for 3 decks with 6 jokers 162 cards. My mom's favorite card game Texas Rummy.
Can you email me at logicalplanet3d gmail.com and I will send you one to try.
Could you make one to handle Catan Cards? 54mm x 80mm.
How thick is the deck?
Are the bumpers only for the reinforced sleeve or can they be used for the simple sleeve as well?
No, just for the rugged sleeve. The bumpers need the lip on the rugged sleeve to stay on.
hey do you have an eta for the pokemon card one no rush ty
pokemon version posted. https://than.gs/m/1333423
Can you tell me the card size and number of cards?
could you make a version for UNO cards?
Yes. I should have it done tomorrow.
How about the UNO No Mercy deck? It has 168 cards and not the standard 108 cards of UNO. Thank you
I have a prototype ready for testing. If you email me I will send it to you to try. email me at logicalplanet3d gmail.com
Uno version posted. https://than.gs/m/1332775
Any chance you could size one up to 5 decks of standard playing cards plus jokers. I help a number of seniors who play hand and foot with 4 folks. That takes 5 decks. If not I can combine 2 cards decks and 1 card deck but the seniors tend to lose thing and 1 is better than 3.
Wow, if you want to test it, I will make it for you. Please email me at logicalplanet3d gmail.com. I have made 3 deck version but it is pushing the limits for sure.
Could you please make one for german cards? its abt 100x60x13mm (length, width, height)
do you mind emailing me at logicalplanet3d gmail.com and I will make one for you.
What is the tolerance for the tops? I made this and the tops don’t fit at all! I did use petg.
Can you explain what you mean? The cover, or the sleeve? And perhaps post a photo or two.