Bounty hunters work best in the shadows, but this one glows. 🔥

I’m excited to share my latest piece—a sleek, neon-inspired tribute to one of the most legendary ships in the galaxy: Boba Fett’s Slave 1 (Firespray). This design combines clean, futuristic lines with an illuminated effect, making it look like a holographic blueprint straight out of a galaxy far, far away.

By day, it has a crisp, minimalist look, but when the lights go down, it truly comes to life with a glowing sci-fi aesthetic. It’s been fun exploring new ways to blend lighting with my designs, and I’m really happy with how this one turned out.

What do you think? Would you want to see more holographic-style ships in this series? Let me know in the comments!

🎨 These are the filaments I've used

• Bambu Lab Basic PLA Black
• Bambu Lab Basic PLA Glow

Print and assembly instructions

Geometric Art

• 0.20 layer height
• Wall Generator: Arachne
• Top surface pattern: Monotonic
• Infill: 15%
• Color change at layer 21 (4.20mm)

Frame

• Wall Generator: Arachne (otherwise the chances of the print-in-place latches fusing to the frame are higher)
• Infill: 15%
• To loosen the latches move them up a bit before turning them
• Use the latches to secure the artwork into the frame (TIP: add a strip of tape to the back of the artwork where the latch will hold if the latch is too loose)
• When you use the wall hook, make sure you turn the latch under the hook to the locked position before installing the wall hook. Slide the artwork under the locked latch first, position it into the frame and close all other latches

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Companion subscription.