Michael T

Surprise Coffin

by
3DGeex
Follow
Follow
Remix Model
kady3dprinting
kady3dprinting
|
|
Image 8 of 8
Surprise Coffin - My make https://kady3dprinting.com/model/3d-printed-surprise-coffin - 3d model
kady3dprinting
kady3dprinting
|
|
Image 8 of 8
Surprise Coffin - My make https://kady3dprinting.com/model/3d-printed-surprise-coffin - 3d model
2D
3D
Makes
Surprise Coffin 3d model
Surprise Coffin 3d model
Surprise Coffin 3d model
Surprise Coffin 3d model
Surprise Coffin 3d model
Surprise Coffin 3d model
Surprise Coffin 3d model
Surprise Coffin - My make https://kady3dprinting.com/model/3d-printed-surprise-coffin - 3d model

Last year I created the Surprise Giftbox which turned out to be a huge hit! Today and specially for Halloween I present you the Surprise Coffin! It comes with 2 skeletons - a good guy and a bad guy, and several cover types . The coffin is a print-in-place with 3MF files included with a very small amount of waste , But you can color it with a regular printer as well by switching colors mid-print!

Please read the instructions:

Printing:

  • The MF skeleton requires supports only under his hands, create some manual supports for this (Although it might print well without)
  • Coffin: No supports, No Brim, Very good adhesion is needed and be careful of warping if you don't have enclosed printer. If you print using AMS - you can disable prime tower to save some filament.
  • Mattress: Create a custom support for part of the lower area if it falls. Do not print it laying down as quality will be worse.
  • Covers - All require supports for the bottom, with AMS you can remove prime tower.
  • For all coloring with a regular printer you can swap filaments mid-print to get same results.

Scale:

Best size is the one provided - You can scale down until stuff start fusing together (I printed successfully at 80%)

You can also scale UP - But the overhangs of the hinges will be big so it might not close smoothly depending on your printer's bridging abilities.

Skeleton - If you want to print it bigger - wait a day or two as I will release a special version which will be made exactly for this purpose!

Hope you like this little toy!


222 Likes147 DownloadsOctober 12, 2024


222 Likes147 DownloadsOctober 12, 2024