**Model**
Crates are great. They're even better if they're miniature, collapsible and stackable! This is a simple print that goes together without any hardware and can hold all of your little bits and pieces on your desk or workbench.

[Build Video](https://youtu.be/OGonTb9sQrQ)

**Print Settings**
Nothing fancy here. 0.2 mm layer height and no supports required. If the parts are not snap fitting, try the sides with reduced tolerances. 

**Hardware Required**
None.

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)

Miniature Collapsible Crate

Assembly.stl

Short_Side_-_Reduced_Tolerance.stl

Long_Side_-_Reduced_Tolerance.stl

**Model**
This is a holder for your keys (or anything else that you might misplace) featuring a double action mechanism for locking and unlocking the key ring in place as well as ejecting it. It’s 100% 3D printed with only double-sided tape or two screws required to mount it to a wall. Featuring 3 different keyring styles and variants that hold from 1 to 4 key rings. Colour code your print or add your own name or logo to the keyring design. This design is based on my [Seat Belt Buckle Desk Fidget Toy](https://thangs.com/electrosync/Seat-Belt-Buckle-Desk-Fidget-Toy-35206?manualModelView=true).

Check out the [Build Video](https://youtu.be/I1K7Dqjdyv8) for assembly instructions.

**Print Settings**
- Button Spring – 0.2 mm layer height, 3 mm brim
- Button – 0.2 mm layer height, supports and 3 mm brim
- Case - 0.2 mm layer height, supports
- Case Bottom – 0.2 mm layer height
- Case Top – 0.2 mm layer height
- Latch – 0.12 mm layer height
- Key rings – 0.2 mm layer height 

**Hardware Required**
3M Command Strips or double-sided tape to mount to wall.

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)

Wall Mount Key Hanger

1. Assembly.stl

14._Case_-_One_Key_-_Screw_Mount.stl

15._Case_-_Two_Key_-_Screw_Mount.stl

16._Case_-_Three_Key_-_Screw_Mount.stl

17._Case_-_Four_Key_-_Screw_Mount.stl

44._Tongue_-_Superior_Bikes.stl

**Model**
Snap close connector that's great for holding small items or fidgeting with. 

Do not use one of these to hold any sort of load or in a situation that could injure you or someone else.

[Build Video](https://youtu.be/5h5bShThIvw)

**Print Settings**
Nothing fancy here. Just regular 0.2 mm layer height and minimum 15% infill.

**Hardware Required**
- 3 x M3 x 14 mm screws
- 3 x M3 washers
- 50 mm paperclip

**Other Info**
I've added 'Type 2' sides that are thinner at the rear and allow the connectors to connect to each other. Unlike the original model, the Type 2 model does require supports though - take your pick between the two. 

Check out Scrath's [version](https://thangs.com/Scrath/Snap-Close-Connector-remix-34222) of this design that also uses nuts 

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)






Snap Close Connector

Snap Close Connector Assembly.stl

Type_2_Connector_Side_1.stl

Type_2_Connector_Side_2.stl

26._Tongue_-_Toyota_TEQ.stl

**Model**
Seat belt buckles have a pretty satisfying mechanism, but it’s not a great idea to play with them on the road! Now you can 3D print your own fidget and desk toy to play with anytime that you want. The design features a double action mechanism for locking and unlocking the tongue in place as well as ejecting it. It’s 100% 3D printed with no other hardware required. Featuring ~20~ ~30~ 40 plus different tongue styles, you can rep your ride! Want a different style on your tongue? Edit your own or let me know what you want in the comments.

Due to popular demand I've also created a [Wall Mount Key Hanger](https://thangs.com/electrosync/Wall-Mount-Key-Hanger-35523?manualModelView=true) based on the same mechanism.

[Build Video](https://youtu.be/I1K7Dqjdyv8)

**Print Settings**
- Button Spring – 0.2 mm layer height, 3 mm brim
- Button – 0.2 mm layer height, supports and 3 mm brim
- Case - 0.2 mm layer height, supports
- Case Bottom – 0.2 mm layer height
- Case Top – 0.2 mm layer height
- Latch – 0.12 mm layer height
- Tongues – 0.2 mm layer height (colour changes optional)

**Hardware Required**
None.

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)

Seat Belt Buckle Desk Fidget Toy

11._Tongue_-_Ford.stl

22._Tongue_-_Jeep.stl

23._Tongue_-_Corolla.stl

24._Tongue_-_Audi_S5.stl

25._Tongue_-_BMW.stl

27._Tongue_-_Mustang.stl

28._Tongue_-_Audi.stl

29._Tongue_-_Audi_TT.stl

30._Tongue_-_Chrysler.stl

31._Tongue_-_Suzuki.stl

32._Tongue_-_Fiat.stl

33._Tongue_-_Volvo.stl

34._Tongue_-_Hyundai.stl

35._Tongue_-_Kia.stl

36._Tongue_-_Lamborghini.stl

37._Tongue_-_3D_Printed.stl

38._Tongue_-_Jaguar.stl

39._Tongue_-_McLaren.stl

40._Tongue_-_Land_Rover.stl

41._Tongue_-_Dacia.stl

42._Tongue_-_Bentley.stl

43._Tongue_-_Audi_TTS.stl

45._Tongue_-_Skoda.stl

46._Tongue_-_Citroen.stl

47. Tongue - Dodge 1.stl

48. Tongue - Dodge 2.stl

50. Tongue - Lexus.stl

**Model**
This model consists of a three piece torpedo that houses a 16 g CO2 cartridge and ballast holder. The launcher is built with a few bits of hardware and is used to puncture the CO2 canister and launch the torpedo underwater. 
_The torpedo won't harm anyone, but be cautious around the launcher (sharp object) and CO2 gas (high pressure and cold)._

_Update: I've also added alternative top and lower sections by request that are extended so that the torpedoes will float rather than sink (untested)._

Check out the [Build Video](https://youtu.be/VAyJWpTFGtY) for assembly instructions and to see how they perform.

**Print Settings**
- Print all parts in their original orientation.
- Torpedo parts: 0.2 mm layer height, 40% infill, no supports (rely on bridging)
- Torpedo - Ballast Holder: Print two of 
- Launcher - Housing: 0.2 mm layer height, 40% infill, supports (touching build plate and increase overhang angle to 80 degrees to avoid supports on outer threads, or use support blocker)
- Launcher - Nail Holder: 0.1 mm layer height (smoother action), 40% infill, supports
- Other launcher parts: 0.2 mm layer height, 40% infill, no supports 
Launcher - Spacers: Print if required to add preload to spring (two sizes to choose from)

**Hardware Required**
- 16 gram disposable CO2 cartridges 
- 1 x M3 x 20 mm machine screw
- 1 x M3 x 4 mm heatset insert
- 1 x 12.7 mm x 38.1 mm x 1.041 mm compression spring (or similar diameter and use spacers)
- 1 x 50 mm x 3.3 mm nail (concrete nails are good)
- Fishing sinkers for ballast (or anything else that you can stuff in the nose cone)

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)

CO2 Pool Torpedo and Launcher

Torpedo - Top Section (Extended Version).stl

Torpedo Lower Section (Extended Version).stl

**Model**
These are tiny storage trays that fit your printer's 20 mm and 40 mm extrusions. Use them to store your SD cards, nozzles or even tiny bits of paper for leveling your bed!

**Print Settings**
Nothing fancy here. Just regular 0.2 mm layer height and minimum 15% infill. Supports required for 20 mm model, no supports for 40 mm model.

**Hardware Required**
Nil. Just slide them onto your printer's aluminium extrusions.

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)






Tiny Storage Tray - Extrusion Mounted

Tray - 40 mm Extrusions.stl

**Model**
This 3D Printed RC Utility Boat is a large catamaran air boat powered by a brushless motor. The boat is designed to carry environmental and water quality monitoring equipment. It is capable of carrying a large payload inside the hull as well as on the optional modular deck system and water sample system (STLs shortly) and the underwater FPV module ([here](https://thangs.com/electrosync/Dome-Housing-for-Underwater-Pan-and-Tilt-Camera--44080?manualModelView=true))


[Build Videos](https://youtube.com/playlist?list=PL8GvyQkytuDe1de9TAWhmk2fqm0deYAWv)

**Print Settings**
- This is a big project and all the print settings can be found in the print guide [here](https://electrosync.com.au/wp-content/uploads/2021/06/Electroysnc-3D-Printed-RC-Boat-Build-Guide.pdf)

**Hardware Required**
- See build guide.

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)

3D Printed RC Catamaran Utility Boat

23. Hull - Old Section 1 .stl

24. Hull - Old Section 2.stl

25. Fin.stl

**Model**
Radio controlled Minecraft boat and captain Steve. Features internal drive system, oar movement and two degrees of freedom on Steve for fishing. 

[Build Video](https://youtu.be/O1SIfNdOJJc)


**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)
 

Radio Controlled Minecraft Boat

Minecraft Boat

Eye 1a

Spur Gear (60 teeth)

Shaft 2

Eye 1b

Oar Arm 1

Oar Socket 2

Shaft 1

Oar Socket 1

Eye 2b

Oar Arm 2

Spur Gear (30 teeth)

Rudder Shaft 1

Deck Mount 1

Oar Mechansism Left Side

Oar Lock 2

Deck Mount 3

Deck Mount 4

Deck Mount 5

Oar Ball

Deck Mount 2

Rudder Shaft 2

Oar Lock 1

Rudder Mount

Rudder Holder

Component98

Oar Mechanism Right Side

Oar Extension

Bow Deck

Bow Wall

Oar Extension 2

Shoulder 1

Lower Body 1

Stern Cover

Right Cover

Torso

Eye 2a

Stern Deck

Bow Cover

Left Cover

Oar Ball 2

Oar 2

Shirt Neck

Nose

Motor Mount 1 

Arm 2

Mouth

Hair

Head

Arm 1

Shoulder 2

Arm Connector Pin

**Model**
Never lose your drill chuck key again with this handy Chuck Norris Approved hanger. Fasten it to your wall or pedestal with double sided tape or screw it on.  And if you really can't find your chuck key or you don't won one, I've included a design without the hooks so you can slap Chuck's approval on anything you like!

**Print Settings**
- 0.2 mm layer height
- supports for version with hooks 
- Change filament at layer 5 (1 mm height) for a multi colour print.

**Hardware Required**
- Double sided tape/screw

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)


Chuck Norris Approved Drill Chuck Key Hook

Chuck Norris Approved Chuck Key Hook.stl

**Model**
This is a model to house a 3 axis pan and tilt kit to suit a 200 mm diameter acrylic dome. Mounts on the side hold 25 mm OD acrylic tubes that house LED strips for underwater lighting. It's designed to mount underneath my 3D printed catamaran utility boat design [here](https://thangs.com/electrosync/3D-Printed-RC-Catamaran-Utility-Boat-44098?manualModelView=true).

[Build Video](https://youtu.be/SGGKnoSkMQ4)

**Print Settings**
- Large parts – 0.6 mm nozzle, 0.36 mm layer height, no supports
- Small parts - 0.4 mm nozzle, 0.2 mm layer height

**Hardware Required**
- 200 mm vacuum formed acrylic dome
- 2 x 300 mm x 25 mm OD acrylic tube
- 8 x M5 x 70 mm bolts
- 8 x M5 nuts
- 4 x M3 x 15 screws
- 4 x M3 nuts

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)


Dome Housing for Underwater Pan and Tilt Camera 

**Model**
Seat belt buckles have a pretty satisfying mechanism, but it’s not a great idea to play with them on the road! Now you can 3D print your own fidget and desk toy to play with anytime that you want. The design features a double action mechanism for locking and unlocking the tongue in place as well as ejecting it. It’s 100% 3D printed with no other hardware required. Featuring ~20~ ~30~ 40 plus different tongue styles, you can rep your ride! Want a different style on your tongue? Edit your own or let me know what you want in the comments.

Due to popular demand I've also created a [Wall Mount Key Hanger](https://thangs.com/electrosync/Wall-Mount-Key-Hanger-35523?manualModelView=true) based on the same mechanism.

[Build Video](https://youtu.be/I1K7Dqjdyv8)

**Print Settings**
- Button Spring – 0.2 mm layer height, 3 mm brim
- Button – 0.2 mm layer height, supports and 3 mm brim
- Case - 0.2 mm layer height, supports
- Case Bottom – 0.2 mm layer height
- Case Top – 0.2 mm layer height
- Latch – 0.12 mm layer height
- Tongues – 0.2 mm layer height (colour changes optional)

**Hardware Required**
None.

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)


**Model**
This is modelled on Collins Aerospace’s ACES 5, but it’s also very similar to the ACES II. Add this ejection seat handle to your workstation or battlestation for when you need to eject from the real or virtual world! Stick the sign up to warn those around you. The multi-part print features a display mount for your desk and a hardware mount for attaching it to your flight sim set-up. 
The handle is a press fit into the bracket. Some hardware is required to mount it to the display stand/hardware mount (see below).

**Print Settings**
Bracket - 0.2 mm layer height, supports
Handle – 0.2 mm layer height, no supports (I used adaptive layer height for a nice surface finish)
Display Stand – 0.2 mm layer height, supports
Hardware Mount - 0.2 mm layer height, supports
Pull to Eject – 0.2 mm layer height (multicolour print – change colour after end of layer 3)
Warning Sign - 0.2 mm layer height (multicolour print – change colour after end of layer 3) 

**Hardware Required**
1 x M6 x 25 mm socket head screw
1 x M6 nut
M6 washers
Double sided tape or glue to attach the signs/labels.

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)



Ejection Seat Handle for Display or Flight Sim

**Model**
Choose your colours and tuck yourself into a tiny modular Minecraft bed. The pillow and mattress can be removed and changed from the bed. 

Print the bed base in wood filament for an authentic look and choose your favourite colour for the mattress! Or, why not print all the colours and interchange them. It makes a great desk ornament or toy!

**Print Settings**
Nothing fancy here. Just regular 0.2 mm and minimum 15% infill.

**Hardware Required**
None.

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)
 

Mini Modular Minecraft Bed

Choose your colours and tuck yourself into a tiny modular Minecraft bed. But there may be monsters nearby...

Minecraft Bed Assembly.stl

Matress.stl

Pillow.stl

Pin.stl

Bed_Base.stl

**Model**
These spacers are used to offset the body posts on the Tamiya TT-02 RC Car. I needed a longer one, so I designed it and I've also included the stock size here as well.

**Print Settings**
- I printed these in resin with a standard profile in the orientation the files are provided in with no supports. 
- You could print these in FDM, but I haven't tried.


**Hardware Required**
- If you're using the longer spacer, you'll need longer screws that you probably already have lying around.

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)

Tamiya TT-02 Body Post Spacers 

TT-02 Body Post Spacer - Stock Size.stl

**Model**
This is a tensile bench test rig made from mostly steel construction for testing tensile strength of whatever you can fit in it. I've tested it up to 1000 kg (the capacity of my scales) to test the breaking strength of metal 3D prints. When things break at these tensions, they can shoot off like bullets, so if you do have a go at building one of these, make sure to take appropriate safety measures. 

You can check out the [Build and Test Video](https://youtu.be/Vrq59w69Rwk) to see how it all works.

**Print Settings**
- A few bits and pieces printed in PLA+ and TPU - mainly for appearances.

**Hardware Required**
- The majority of steel is 50 mm x 50 mm x 2 mm
- For the pivot arm, I used some salvaged steel: 50 mm x 60 mm x 5 mm (this arm takes most of the force). 
- A barrel jack is used to apply force to the test rig. 

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)

Print Buster 3000 - 1 Tonne Tensile Test Rig

Body1

Body2

Label

Label (1)

**Model**
This is a a modular deck system that fits my 3D printed catamaran utility boat [here](https://thangs.com/electrosync/3D-Printed-RC-Catamaran-Utility-Boat-44098?manualModelView=true). This is designed to hold utility systems such as water sampling, [underwater cameras](https://thangs.com/electrosync/Dome-Housing-for-Underwater-Pan-and-Tilt-Camera--44080?manualModelView=true), etc. using a quick release pin system.

[Build Video](https://youtu.be/Bp1Fw5bALzA)

**Print Settings**
- All parts – 0.6 mm nozzle, 0.36 mm layer height, no supports
- Build guide for the boat is available [here](https://electrosync.com.au/wp-content/uploads/2021/06/Electroysnc-3D-Printed-RC-Boat-Build-Guide.pdf). To be updated shortly with this deck system. 

**Hardware Required**
- Build guide update coming shortly.

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)


Modular Deck System for 3D Printed RC Catamaran Utility Boat

8._Deck_Joint.stl

**Model**
These are the 3D printed parts that make up the automated water sampling carousel that fits to the [Modular Deck System](https://thangs.com/designer/electrosync/3d-model/Modular%20Deck%20System%20for%203D%20Printed%20RC%20Catamaran%20Utility%20Boat-44113?manualModelView=true) of my [RC Catamaran Utility Boat](https://thangs.com/mythangs/file/44098). It holds four 200 mm sample bottles and one of the spots on the carousel can be for a purge bottle (bottomless) that runs the pump back to the water body that you are sampling. Parts 2-6 are the core parts for the carousel. The other parts are for mounting the liquid level sensor and electronics cases - this will depend on your setup. It uses readily available hardware and electronics (more details and parts listed below). [This is the Build Video](https://youtu.be/Bp1Fw5bALzA)

**Print Settings**
- 0.2 mm layer height should work for everything except for the 90 tooth pulley that you may like to print at 0.12 mm or so. No supports are required.

**Hardware Required**
- 3 mm hardware for mounting the motor, pulley wheel and turntable bottom. 
- 6 mm bolt, nut and washer to mount the turntable top to the bottom of the motor electronics case lid
- 200 mm GT2 belt
- NEMA 17 stepper motor (pancake is better if you have it)
- 20 tooth GT2 pinion (stock on many 3D printers)
- 1 x 608 bearing for pulley wheel
- 3 mm heatset inserts for cases
- The quick release pins use R clips

More details on the electronic parts, Arduino sketches and code are available on my [website](https://electrosync.com.au/2021/01/08/3d-printed-rc-utility-boat/)

If you have any questions, ask below and I'll do my best to answer.

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)

Automated Water Sampling Carousel

**Model**
This is a dual camera mount to suit an off the shelf 3 axis pan and tilt kit, like this [one](https://core-electronics.com.au/fpv-nylon-pan-tilt-kit-without-servo.html). It's designed to suit Foxeer Micro FPV cams and the Insta360 One Go 2. The mount accepts a 7 mm x 2 mm neodymium magnet. The two covers are used to hide the cameras and reduce reflections if housed in a dome for underwater use like this [one](https://thangs.com/electrosync/Dome-Housing-for-Underwater-Pan-and-Tilt-Camera--44080?manualModelView=true).  

[Build Video](https://youtu.be/SGGKnoSkMQ4)

**Print Settings**
- 0.2 mm layer height, supports required

**Hardware Required**
7 mm x 2 mm neodymium magnet

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)

FPV and Insta360 Go 2 Dual Cam Mount and Blackout Covers for Pan and Tilt 

**Model**
This is a case to suit an Arduino Nano BLE 33 for use as an FPV head tracker. It has openings for the power/data port, a 3.5 mm mono socket and a tactile switch.

[Build Video](https://youtu.be/SGGKnoSkMQ4)

**Print Settings**
- 0.2 mm layer height, no supports

**Hardware Required**
- Arduino Nano BLE 33
- 1 x 0.7 mm micro tactile switch
- 1 x 3.5 mm mono socket
- 2 x 2 mm x 7 mm screws

**More Electrosync**
[YouTube](http://youtube.com/user/electrosync)
[Instagram](https://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)

FPV Head Tracker Case for Arduino Nano BLE 33 

Utility Boat Cowell and Mounts

Cowell.stl

Creating obscurely, useful, things.

[YouTube](http://www.youtube.com/user/electrosync)
[Instagram](http://www.instagram.com/electrosync)
[Website](https://electrosync.com.au/)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

electrosync

Achievements

Explorer

Fan Favorite

Sapling

Novice Maker